6222Re: LS2 and OpenLink 0.52 bricks to 6 LED blinking after Samba 3 installed
- Oct 25, 2007--- In LinkStation_General@yahoogroups.com, "James Stewart"
> Sounds like the watchdog timer is not being turned off anymore.Don't know much
> about OpenLink, especially the LS2 version (runs BusyBox?), but seeif "dmesg" works
> (you might need to do "dmesg |more" to read it all. Also seeif /var/log exists and see
> if there are any thing that looks like a boot log in there (view itwith "more
> <filename>". Check these logs for anything that looks like it ishanging with an error.
>the boot process
> My guess is that something (like samba trying to load!) is stopping
> before the watchdog gets turned off. If /etc/init.d exists, trymoving "samba" out of it
> (mv /etc/init.d/samba /etc/samba.saved) to disable it.I finally find it was caused by the file libpthread-0.10.so as
the "ls" command was failed too. Then I download and install this
file from Askwar's site, problem is solved.
Anyway, thanks for your tips.
- << Previous post in topic