Loading ...
Sorry, an error occurred while loading the content.

6218Re: LS2 and OpenLink 0.52 bricks to 6 LED blinking after Samba 3 installed

Expand Messages
  • James Stewart
    Oct 24, 2007
      --- In LinkStation_General@yahoogroups.com, "stannusw" <stannusw@...> wrote:
      > I'm new to Linux. Following the guide on linkstationwiki, I manage to
      > install Openlink 0.52 and reboot successfully.
      > But after Samba 3 installed and reboot, the LS2 runs about 5 min and
      > turns off with red LED blinking 6 times. During that 5 min, I can
      > telnet with "root" account but I don't know how to fix it.
      > Had tried the firmware flasher, but it couldn't find the LS2.
      > Please help. Thanks.

      Sounds like the watchdog timer is not being turned off anymore. Don't know much
      about OpenLink, especially the LS2 version (runs BusyBox?), but see if "dmesg" works
      (you might need to do "dmesg |more" to read it all. Also see if /var/log exists and see
      if there are any thing that looks like a boot log in there (view it with "more
      <filename>". Check these logs for anything that looks like it is hanging with an error.

      My guess is that something (like samba trying to load!) is stopping the boot process
      before the watchdog gets turned off. If /etc/init.d exists, try moving "samba" out of it
      (mv /etc/init.d/samba /etc/samba.saved) to disable it.
    • Show all 3 messages in this topic