Loading ...
Sorry, an error occurred while loading the content.

4146Re: Cool'n Quiet on LS2 MIPS : news > Need the UARTD process name!

Expand Messages
  • Frenchy
    Oct 9, 2005
      To owners of noisy LS2's, (the Linstation fans have a short life)

      As the father of the CnQ script, if you want me to make try and make
      it work on LS2 I need the exact name string of the UART daemon
      process on LS2 called "ppc_uartd" on LS1. Know that there is a
      condition when this process is stopped and I need it to run. So I
      always make sure it is running before handling any status change.

      I read the entire page below all the way down, no trace of UARTD
      there. INSTEAD OPEN A TELNET ON YOUR LS2 AND TYPE THIS: ps -ef
      Then post a reply with the output or whatever is the UARTD name
      string.

      It boils down to test on LS2 you can try to bypass my script
      manipulations of UARTD, then refresh my memory about why it is
      required. It won't wipe out your disk instantly but I
      *sort*of*recall* that daily cron log rotation around 4am stops the
      UARTD and without it the fan speed is stuck in watever status it was
      before UARTD stop (thus explaining why I always check on it and
      restard it when needed) - Well if I had an LS2 handy I could figure
      this out.

      I have an enhancement up my sleeve to redirect log outputs to an
      external USB key so the HDD does not get spun only to dump 2 lines
      at the bottom of a log file. I see that happening about every 3
      hours where instead my disk could sleep non-stop unless the network
      needs it.
      Sam.

      --- In LinkStation_General@yahoogroups.com, "samerbaer"
      <samerbaer@y...> wrote:
      >
      > Hi,
      > just wanted to add that I'm really interrested in this feature as
      well
      > What exactly is the problem running it?
      > If I issue "echo -n '\\\\' >/dev/ttyS0" the fan slows down etc.
      >
      > my linkstation2 with Openlink 0.52b gives the following output to
      ls:
      > lrwxrwxrwx 1 root root 18 Sep 28 14:11
      S05dropbear ->
      > ../init.d/dropbear
      > lrwxrwxrwx 1 root root 18 Sep 28 14:11
      S05utelnetd ->
      > ../init.d/utelnetd
      > lrwxrwxrwx 1 root root 18 Sep 28 14:11
      S10murasaki ->
      > ../init.d/murasaki
      > lrwxrwxrwx 1 root root 17 Sep 28 14:11
      S10ntpdate ->
      > ../init.d/ntpdate
      > lrwxrwxrwx 1 root root 16 Sep 28 14:11 S10syslog -
      >
      > ../init.d/syslog
      > lrwxrwxrwx 1 root root 16 Sep 28 14:11 S11devfsd -
      >
      > ../init.d/devfsd
      > lrwxrwxrwx 1 root root 21 Sep 28 14:11 S11ekpd ->
      > /etc/rc.d/init.d/ekpd
      > lrwxrwxrwx 1 root root 17 Sep 28 14:11
      S20apservd ->
      > ../init.d/apservd
      > lrwxrwxrwx 1 root root 15 Sep 28 14:11 S20inetd ->
      > ../init.d/inetd
      > lrwxrwxrwx 1 root root 25 Oct 4 15:58
      > S20smartmontools -> /etc/init.d/smartmontools
      > lrwxrwxrwx 1 root root 16 Sep 28 14:11 S20thttpd -
      >
      > ../init.d/thttpd
      > lrwxrwxrwx 1 root root 15 Sep 28 14:11 S60lprng ->
      > ../init.d/lprng
      > lrwxrwxrwx 1 root root 14 Sep 28 14:11 S89cron ->
      > ../init.d/cron
      > lrwxrwxrwx 1 root root 15 Sep 28 14:11 S90atalk ->
      > ../init.d/atalk
      > lrwxrwxrwx 1 root root 13 Sep 28 14:11 S91smb ->
      > ../init.d/smb
      > lrwxrwxrwx 1 root root 14 Sep 28 14:11 S92ftpd ->
      > ../init.d/ftpd
      > lrwxrwxrwx 1 root root 16 Sep 28 14:11 S92pcastd -
      >
      > ../init.d/pcastd
      > lrwxrwxrwx 1 root root 17 Sep 28 14:11
      S95mc_ctld ->
      > ../init.d/mc_ctld
      > lrwxrwxrwx 1 root root 15 Sep 28 15:56 S99nfs ->
      > /etc/init.d/nfs
      > lrwxrwxrwx 1 root root 19 Sep 28 14:11
      S99rmnologin
      > -> ../init.d/rmnologin
      >
      > Cheers,
      > Jens
      >
      > --- In LinkStation_General@yahoogroups.com, "punga1968"
      <yahoo@p...>
      > wrote:
      > > Hello,
      > >
      > > any news in adapting the Cool'n Quiet - script for the LS2?
      > >
      > > Would be great!
      > >
      > > cheers
      > > Punga
      > >
      > >
      > > --- In LinkStation_General@yahoogroups.com, "hadaps"
      <hadaps@y...>
      > > wrote:
      > > > Hey - I have a LS2 - the output is:
      > > >
      > > > bash-2.05a# ls -l /etc/rc.d/rc2.d
      > > > total 1
      > > > lrwxrwxrwx 1 root root 18 Aug 31 21:23
      > > S05dropbear ->
      > > > ../init.d/dropbear
      > > > -rw------- 1 root root 458 Aug 31 21:28
      S05utelnet
      > > > lrwxrwxrwx 1 root root 18 Aug 31 21:23
      > > S05utelnetd ->
      > > > ../init.d/utelnetd
      > > > lrwxrwxrwx 1 root root 18 Aug 31 21:23
      > > S10murasaki ->
      > > > ../init.d/murasaki
      > > > lrwxrwxrwx 1 root root 17 Aug 31 21:23
      S10ntpdate -
      > > >
      > > > ../init.d/ntpdate
      > > > lrwxrwxrwx 1 root root 16 Aug 31 21:23
      S10syslog ->
      > > > ../init.d/syslog
      > > > lrwxrwxrwx 1 root root 16 Aug 31 21:23
      S11devfsd ->
      > > > ../init.d/devfsd
      > > > lrwxrwxrwx 1 root root 21 Aug 31 21:23
      S11ekpd ->
      > > > /etc/rc.d/init.d/ekpd
      > > > lrwxrwxrwx 1 root root 17 Aug 31 21:23
      S20apservd -
      > > >
      > > > ../init.d/apservd
      > > > lrwxrwxrwx 1 root root 15 Aug 31 21:23
      S20inetd ->
      > > > ../init.d/inetd
      > > > lrwxrwxrwx 1 root root 16 Aug 31 21:23
      S20thttpd ->
      > > > ../init.d/thttpd
      > > > lrwxrwxrwx 1 root root 15 Aug 31 21:23
      S60lprng ->
      > > > ../init.d/lprng
      > > > lrwxrwxrwx 1 root root 14 Aug 31 21:23
      S89cron ->
      > > > ../init.d/cron
      > > > lrwxrwxrwx 1 root root 15 Aug 31 21:23
      S90atalk ->
      > > > ../init.d/atalk
      > > > lrwxrwxrwx 1 root root 13 Aug 31 21:23
      S91smb ->
      > > > ../init.d/smb
      > > > lrwxrwxrwx 1 root root 14 Aug 31 21:23
      S92ftpd ->
      > > > ../init.d/ftpd
      > > > lrwxrwxrwx 1 root root 16 Aug 31 21:23
      S92pcastd ->
      > > > ../init.d/pcastd
      > > > lrwxrwxrwx 1 root root 17 Aug 31 21:23
      S95mc_ctld -
      > > >
      > > > ../init.d/mc_ctld
      > > > lrwxrwxrwx 1 root root 18 Aug 31 23:58
      > > S98AutoFand ->
      > > > ../init.d/AutoFand
      > > > lrwxrwxrwx 1 root root 19 Aug 31 21:23
      S99rmnologin
      > > > -> ../init.d/rmnologin
      > > >
      > > > Regards Benny
      > > >
      > > > --- In LinkStation_General@yahoogroups.com, "oseyboldt"
      <oli@s...>
      > > wrote:
      > > > > > > Can someone with LS2 reply with the output of this
      command:
      > > > > > > ls -l /etc/rc.d/rc2.d
      > > > > > >
      > > > >
      > > > > My ls2 gives the following output:
      > > > >
      > > > > root@SPEICHER:/www/cgi-bin3# ls -l /etc/rc.d/rc2.d
      > > > > total 0
      > > > > lrwxrwxrwx 1 root root 18 Aug 28 19:54
      > > S05dropbear -
      > > > > > ../init.d/dropbear
      > > > > lrwxrwxrwx 1 root root 18 Aug 28 19:54
      > > S10murasaki -
      > > > > > ../init.d/murasaki
      > > > > lrwxrwxrwx 1 root root 17 Aug 28 19:54
      > > S10ntpdate -
      > > > > > ../init.d/ntpdate
      > > > > lrwxrwxrwx 1 root root 16 Aug 28 19:54
      > > S10syslog -
      > > > > > ../init.d/syslog
      > > > > lrwxrwxrwx 1 root root 16 Aug 28 19:54
      > > S11devfsd -
      > > > > > ../init.d/devfsd
      > > > > lrwxrwxrwx 1 root root 21 Aug 28 19:54
      S11ekpd -
      > > > > > /etc/rc.d/init.d/ekpd
      > > > > lrwxrwxrwx 1 root root 17 Aug 28 19:54
      > > S20apservd -
      > > > > > ../init.d/apservd
      > > > > lrwxrwxrwx 1 root root 15 Aug 28 19:54
      S20inetd -
      > > > > > ../init.d/inetd
      > > > > lrwxrwxrwx 1 root root 25 Aug 28 22:07
      > > > > S20smartmontools -> /etc/init.d/smartmontools
      > > > > lrwxrwxrwx 1 root root 16 Aug 28 19:54
      > > S20thttpd -
      > > > > > ../init.d/thttpd
      > > > > lrwxrwxrwx 1 root root 15 Aug 28 19:54
      S60lprng -
      > > > > > ../init.d/lprng
      > > > > lrwxrwxrwx 1 root root 14 Aug 28 19:54
      S89cron -
      > > > > > ../init.d/cron
      > > > > lrwxrwxrwx 1 root root 15 Aug 28 19:54
      S90atalk -
      > > > > > ../init.d/atalk
      > > > > lrwxrwxrwx 1 root root 13 Aug 28 19:54
      S91smb -
      > > > > > ../init.d/smb
      > > > > lrwxrwxrwx 1 root root 14 Aug 28 19:54
      S92ftpd -
      > > > > > ../init.d/ftpd
      > > > > lrwxrwxrwx 1 root root 16 Aug 28 19:54
      > > S92pcastd -
      > > > > > ../init.d/pcastd
      > > > > lrwxrwxrwx 1 root root 17 Aug 28 19:54
      > > S95mc_ctld -
      > > > > > ../init.d/mc_ctld
      > > > > lrwxrwxrwx 1 root root 18 Aug 29 23:46
      > > S98AutoFand -
      > > > > > ../init.d/AutoFand
      > > > > lrwxrwxrwx 1 root root 19 Aug 28 19:54
      > > > > S99rmnologin -> ../init.d/rmnologin
      > > > >
      > > > >
      > > > > So what has to be modified? Does anyone succeed with
      adapting
      > > > > AutoFan and AutoFand for the ls2?
      > > > >
      > > > > Best,
      > > > > Oliver
      >
    • Show all 21 messages in this topic