3322Re: [LinkStation_General] Re: USB printer setup
- Jul 1, 2005Thanks very much for that, will try it out later today.RegardsPeter
*********** REPLY SEPARATOR ***********
On 01/07/2005 at 08:11 haberschnasel wrote:
the list of printers seems to be irrelevant for windows users. I have
chosen "postscript" for my Samsung ML-1450 (which does not support
postscript) and it works fine with my LS (1.45_13).
This is the way to go: The samba network share of your LS is showing a
lpt1-device once you connect a usb printer to your LS and have enabled
a usb printer in the LS webinterface (again, you may choose
postscript). When you connect to / install this printer with windows
(right click on it in the network share), you are asked to install a
driver. I installed the GDI driver that came with my printer. You may
as well choose any driver that windows accepts/suggests. The LS seems
to handle the printing transparently, i.e. just passes bits and bytes
to the usb device, so there is no problem. I installed a PCL driver
later, duplex printing works fine, etc.
There is just one catch: The communication is one-way, such that
scanner and/of fax recieve features will not work. Everything else
I do not know why they do not advertise the printserver as generic
(maybe for mac or linux environments it is important, but postscipt is
fairly widespread there). Maybe there are problems with some specific
printer models. But windows users are definitely not bound to the
epson-or-postscript printer list.
--- In LinkStation_General@yahoogroups.com, "downlalaway"
> Don't know if LS2 fimware does support the samsung printer (one may be
> similar enough to work it)- there may be a set of drivers that one can
> compile or drop in to make it do so. This might not be so straight
> forward but depends on your linux. You'll need telnet access. The
> place to find out about printer compatibility & drivers is
> linuxprinting.org which will give an idea of whether it could ever be
> supported and in what way (some manufacturers don't help).
> The apparent lack of printer support ( started me off down the road of
> turning it into a full presonal server as a learning exercise.
> By the way if you've got a linkstation 2 (with firmware 2.xx on it)
> then the firmware versions 1.4x are completely incompatible -
> different processors. It will mess it up significantly but maybe(?)
> not terminally. Versions 1.4x are for the powerPC LS1 version -I've
> got one of these.
> --- In LinkStation_General@yahoogroups.com, "Peter Cassidy"
> <peter@c...> wrote:
> > Sorry if this is a newbie question but....
> > I want to use the Linkstation (ver 1.45) as a print server for a
> Samsung CLP-510.
> > Looking in the setup menu it has support for either postscrip or a
> load of Epson printers?
> > Is there any pdf or other info showing how to setup for something
> like the CLP-510 as I don't believe it is a postscript printer and it
> certainly isn't an Epson?
> > Best Regards
> > Peter Cassidy
> > Cassidy Consulting Ltd
> > Tel: 01323 521940
> > Fax: 01323 521948
> > Mobile: 07956 976236
> > Email: peter@c...
> > Blainslie House
> > 6 Nevill Avenue
> > Eastbourne
> > East Sussex
> > BN22 9PT
> > UK
> > Confidentiality notice:
> > The information contained in this email is confidential.
> > You may not use, copy, print or forward this to any
> > others parties or use it's contents in any way whatsoever.
> > If you are not the intended recipient we would appreciate
> > you replying to let us know that you received it incorrectly.Best RegardsPeter CassidyCassidy Consulting LtdTel: 01323 521940Fax: 01323 521948Mobile: 07956 976236Email: peter@...Blainslie House6 Nevill AvenueEastbourneEast SussexBN22 9PTUKConfidentiality notice:
The information contained in this email is confidential.
You may not use, copy, print or forward this to anyothers parties or use it's contents in any way whatsoever.
If you are not the intended recipient we would appreciateyou replying to let us know that you received it incorrectly.
- << Previous post in topic