Loading ...
Sorry, an error occurred while loading the content.

Topics List

AutoStar II shuts down

(4)
Finally got around to hooking up to computer without handbox. Put in AltAz mount and computer ran the scope. Did have the telescope connection drop once
darksky_jlb
4
posts
11:55 AM

Help for disassembly a fork

(3)
Hi Ron. I've been looking for pictures and I've not found much about it, but I've a couple of links sended for some members privately. Thanks for your comment.
Talish de Zander
3
posts
8:16 AM

the ever present jitters

(3)
Gday Chuck ... Maybe :-), or it may be a bad bearing on the worm. If you can use PHD or Metaguide or PEMPro to grab an unguided error plot of RA, it can be
johansea
3
posts
May 31

LX200GPS/Robofocus Problem

(5)
Problem resolved. The Robofocus was not binding at all. I found this out when I noticed the numbers in the focuser software were changing but the focusing knob
Keith Graham
5
posts
May 29

LX200 GPS automatically restarts itself

(5)
Thanks to all for your hints. I will try all that you say. Kind regards
talishdezander
5
posts
May 25

Setting LX200-ACF GPS mount limits.

(4)
Gday Mike Try using the handbox to select a different sized scope and hit enter. Then reselect your scope and hit enter. That should reset the upper and lower
johansea
4
posts
May 22

Alternate finder scope mounting options

(5)
My 10" GPS is loaded just about to the max with additional equipment. You can see it on my website. Observatory http://www.mts.net/~lmlod/Observatory.html
l_d_bonnie
5
posts
May 16

Questions on PEC Training and Editing

(9)
Very interesting point, Jacques, and I don't know the answer. But it seems to me that if you have higher resolution in the guide scope, a little fluctuation
Joe Bauman
9
posts
May 2

No GPS data

(36)
Stewart, You wanted to know when I list the 14" Meade Package. It is now on both Astromart and Cloudy Nights below:
George Erdel
36
posts
May 2

Center Bolt

(8)
Paul Thanks for the advice... Steve On Wed, Apr 29, 2015 at 03:59 PM, paul valleli paulvalleli@gmail.com [LX200GPS] wrote: Be careful that the 1/2-13 bolt is
STEVEN HAND
8
posts
Apr 29
frankkloer
11
posts
Apr 15

Startup and PE questions

(10)
Hi Paul, I do know about the a PARK routine and parking the scope after each session. I did get that rotation issue fixed. When I was working with one of the
Keith Graham
10
posts
Apr 13

DEC ENCODER WANTED

(13)
Hi all: A while back my Meade LX200R encoder died. I found a gent back east that is remaking the encoders. I bought 2 just in case, but the one I installed
Monte Huston
13
posts
Apr 13

LX200GPS and PHD2 Autoguiding

(10)
Dear Keith, Thank you for your comments. To have those pictures I take my image with an ED80 with an STL11K piggyback on the LX200 14" with a DSI. With this
february2k7
10
posts
Apr 12

Anywhere to purchase an LX200GPS main controller board.

(72)
... That was an editing problem on my part. I intended to delete the trailer part of the text, but, got too much. All the statements in the earlier message
Thomas D. Dean
72
posts
Apr 11
View First Topic Go to View Last Topic
Loading 1 - 15 of total 15 topics