- It's critically important that any programming for the new KG-UV6D
models only use software for that model. Using software for the KG-UV
1/2/3 models will destroy the radio. The same is true for using the
correct software for the KG-UV 1/2/3's -- do not use the KG-UV6D software.
To program the KG-UV6D using David Bahar's TW6Edit v.004 .xls macro,
use MS Excel to create a .xls file (that you should probably save), and
then enter a full path-name for the folder where you will save the .tw
file into cell F2 of the spreadsheet. When you click on the "write" in
cell C2, the .tw file will be written to the folder specified in cell
F2. There won't be any message that it's been written, so you'll need
to look at that folder (Win Explorer) to verify that it is there. Then,
open the Wouxun KG-UV6DPv2.5K.exe program (do not use any other program
to write to the HT!), 'read' from the radio to verify that your cable
and driver work correctly, 'open' the .tw file created above, and the
'write' to the radio.
This is the same procedure that's used to program the KG-UV 1/2/3 models
using TWEdit v.0003 and Wouxun's KG-UVD1P 2.0.exe / KG-UV2D.exe /
KG-UV3D.exe to write the .tw file to the radio.