Re: [JT9digitalhams] Awful time TX for JT9-1
- Hi Andrew et al,
Thanks for your input; I changed the JT9 drivers
in the setup to "Direct X Primary Capture /
Direct X Primary Sound" reset the audio out via
the Tune button, no ticks! Just made a VA7 QSO and
he copied me -17 with 6 w out.
TU Andrew and TU List.
73 de Bill WB2SXY sk dit dit
On 6/8/2013 9:26 PM, Andrew ZL3CC wrote:
> I was getting the "ticks" too until I selected the DirectX
drivers in the sound card setup, then all was well.
> Andrew ZL3CC
> On 9/06/2013, at 9:18, Bill Kasper<williamkasper@...> wrote:
>> Thanks Ed K0KC for looking at my signal,
>> I appreciate ur time and energy!
>> NY --> OH, 40m, around 2100z
>> Ed's signal to me was strong, prop good.
>> Summary: for the list, (other suggestions?)
>> took power out down to middle of the
>> ZERO marker on the output dial, and volume mixer
>> down to 6%, clock from -0.3 to 0.1, and still
>> no decodes even though signal strength seemed
>> good. Screen shot from Ed looks just like
>> a normal mid-strength JT9 signal.
>> The tune button on the main screen still shows
>> 'Ticks' which are mentioned in the setup
>> instructions, but no remedy is mentioned.
>> Ur Ideas, pse?
>> tnx es 73 de Bill K WB2SXY
>> On 6/8/2013 3:43 PM, Bill Kasper wrote:
>>> Hi All,
>>> I am having an awful time setting up TX for
>>> JT9-1 and it has a slight 'tick' every few
>>> seconds. Receive is about perfect as I can
>>> decode nearly everything I can see.
>>> Just answered a CQ:
>>> 1905 -12 -0.1 1585 CQ KJ6RGX EM27
>>> 190601 Tx: KJ6RGX WB2SXY FN13
>>> 1907 -14 -0.3 1585 CQ KJ6RGX EM27
>>> 190801 Tx: KJ6RGX WB2SXY FN13
>>> 1909 -16 -0.2 1585 SRI NO DECODE
>>> 1911 -14 -0.3 1585 PSE TRY AGN
>>> 191201 Tx: KJ6RGX WB2SXY FN13
>>> 1913 -17 -0.1 1585 SRI NO DECODE
>>> 1915 -12 -0.3 1585 CQ KJ6RGX EM27
>>> I am having a rough time setting up my tx for JT9,
>>> was running around 8 and then 16 watts.
>>> As you can see I was decoding just fine, and
>>> my clock was close to his; showing him as only
>>> -0.1 to -0.3 sec DT.
>>> WSJT-X v 1.0 r3323
>>> Windoze Vista (Home Premium), 32 bit OS
>>> AMD Athlon dual-Core QL-62, 2.00GHZ
>>> RAM: 2.00GB
>>> TX: Icom IC-756pro2, Donner interface
>>> I run the sound card Volume Mixer at 30%;
>>> JT65 and other digi modes usually at 50%
>>> I have gone through the setup many times and
>>> seem to be able to decode every signal I can see.
>>> am I just TX too weak for the paths??
>>> I run all other digi modes just fine, JT65 works
>>> great. I can decode JT65 to -27 when the band is
>>> What is the problem ??? Suggestions please
>>> for troubleshooting this -- I would like to
>>> use JT9 more; I had better luck with a VERY OLD
>>> tnx es 73 de Bill K WB2SXY sk dit dit
>> No virus found in this message.
>> Checked by AVG - www.avg.com
>> Version: 2013.0.2904 / Virus Database: 3184/6376 - Release Date: 06/02/13
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2013.0.2904 / Virus Database: 3184/6376 - Release Date: 06/02/13
> Internal Virus Database is out of date.
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2013.0.2904 / Virus Database: 3184/6376 - Release Date: 06/02/13
Internal Virus Database is out of date.