Loading ...
Sorry, an error occurred while loading the content.

42987RE: [Imperial-Club] 61 Front Wheel Cylinders - Buy from Whom?/ PROGRESS on the FUEL SENDER !!

Expand Messages
  • Richard A. DeVito Sr
    Mar 15, 2014
      You can also rebuild the wheel cylinders. You can buy a rebuild kit on Rock Auto or almost any parts store. Or any mechanic can rebuild them easily. I just rebuilt all fours on my 48 Lincoln Continental Conv. Usually the rubber goes bad.

      Fuel sending units are something different. You can buy a replacement unit. Often they get gummed up and don't respond. You have to take the unit out to determine the problem.

      Hope that helps.

      Richard A. De Vito Sr


      From: Imperial-Club@yahoogroups.com on behalf of norman silverman
      Sent: Fri 3/14/2014 8:38 PM
      To: imperial-club@yahoogroups.com
      Subject: [Imperial-Club] 61 Front Wheel Cylinders - Buy from Whom?/ PROGRESS on the FUEL SENDER !!

      Hello All.
      Today, my right front wheel locked up after the brakes were applied. After it released (by driving backwards) I took the drum off and saw that the top cylinder is leaking. I want to replace all wheel cylinders and wonder who has a good quality product for a rational price. All comments welcome.

      Next, and FINALLY, some progress on the Fuel Sending unit mystery.

      Synopsis: New sending unit did not work inside the tank, although it did when hooked up outside the tank. My Bulgarian Diesel mechanics were intrigued by this circumstance and asked if they could take a look. Given that in Bulgaria they had to make do with inferior or missing parts all during their time there, I thought "hey, it couldn't hurt". Anyway, Richie figured that the float arm was not properly configured for this application so he bent it downward a bit. Because there was no gas in the car to speak of, there was no indication on the gauge. I then drove a very short distance to a gas station and put in 10 gallons, which caused the needle to go to 1/4 FOR THE FIRST TIME EVER. When I have time I'm going to pull the sender and bend the arm more to see if that will solve it entirely.


      [Non-text portions of this message have been removed]
    • Show all 5 messages in this topic