Loading ...
Sorry, an error occurred while loading the content.

Tail Stock for 4" Rotary Table

Expand Messages
  • Sandy8228 <camdoc@pacbell.net>
    Has anyone located a Tail Stock that would work with the H.F. 4 Rotary Table? Sandy
    Message 1 of 3 , Feb 22, 2003
    • 0 Attachment
      Has anyone located a Tail Stock that would work with the H.F. 4"
      Rotary Table?
      Sandy
    • Sci Fi Guy
      ...or are there plans to build one out there somewhere? Barry ... From: To: Sent: Saturday, February 22,
      Message 2 of 3 , Feb 22, 2003
      • 0 Attachment
        ...or are there plans to build one out there somewhere?
        Barry
        ----- Original Message -----
        From: <camdoc@...>
        To: <GrizHFMinimill@yahoogroups.com>
        Sent: Saturday, February 22, 2003 7:05 PM
        Subject: [GrizHFMinimill] Tail Stock for 4" Rotary Table


        : Has anyone located a Tail Stock that would work with the H.F. 4"
        : Rotary Table?
        : Sandy
      • jjfear <jjfear@ix.netcom.com>
        Sherline sells an adjustable one. it adjusts by having elongated slots between the top piece and the bottom. It should not be too difficult to replicate. HTH
        Message 3 of 3 , Feb 22, 2003
        • 0 Attachment
          Sherline sells an adjustable one. it adjusts by having elongated
          slots between the top piece and the bottom. It should
          not be too difficult to replicate.

          HTH

          Jerry F

          --- In GrizHFMinimill@yahoogroups.com, "Sandy8228 <camdoc@p...>"
          <camdoc@p...> wrote:
          > Has anyone located a Tail Stock that would work with the H.F. 4"
          > Rotary Table?
          > Sandy
        Your message has been successfully submitted and would be delivered to recipients shortly.