Loading ...
Sorry, an error occurred while loading the content.

3143Re: [GrizHFMinimill] Re: minimill ?

Expand Messages
  • james04
    May 2, 2004
      Are you guys on the same page. I ask because you say minimill G8689? and the remark was maid about the drill/mill G0517. However, I've seen fine results posted from both machines. I own the HF version of the minimill and couldn't be happier with it.

      ----- Original Message -----
      Sent: Saturday, May 01, 2004 11:51 AM
      Subject: Re: [GrizHFMinimill] Re: minimill ?

      Perhaps before you make such inflamatory statements
      you should see some of the things people have made
      with their minimills. While I agree that the machines
      largest drawback is not it's size but rather it's lack
      of rigidity, I do not agree that only big hogging cuts
      with huge endmills are "serious".

      If cubic feet per minute of metal removal were the
      measure of "serious" machining, we would all throw
      away our Bridgeports and use nothing but the old
      Kearney and Trecker's, Cincinatti's and all the
      horizontals from pre 1970. The reality is that what is
      "serious" to one guy is silly to another. I know some
      extremely "serious" machinists that take little tiny
      itty bitty cuts when a hole simply must be correct to
      within 50 millionths or so. I also know some extreme
      modellers who do very "serious" work on live steam
      model locomotives.

      My point is, anybody who needs to do big lot
      production, work on large stuff or just needs to
      remove a lot of material wouldn't be looking at these
      machines anyway.

      Oh, one more thing, I own a minimill and I am a
      "serious" toolmaker.

      Barry Young

      --- cikoolk <cliffyk@...> wrote:
      > If you want to do any serious milling this is not a
      > good machine to
      > buy, as it is essentially a drill press with and XY
      > table--in fact
      > the head assembly is identical to that of many Asian
      > drill presses
      > sold by HF, Grizzly, Homier, and others.
      > I think you'll find that using a 1/4" end mill, in
      > mild steel, will
      > be the machines real upper limit; and that a 3/4"
      > face mill will
      > shake this puppy's tail...
      > --- In GrizHFMinimill@yahoogroups.com, "Ron"
      > <ronpierce1@m...> wrote:
      > > I just ordered the Grizzly G0517, I noticed it
      > says the end mill
      > > capacity is 1/4 inch, does this mean the depth ?
      > as you mill ? but
      > > you can use wider endmills ? like 1/2 inch at 1/4
      > deep per pass ?
      > > Ron
      > ------------------------ Yahoo! Groups Sponsor

      > Yahoo! Groups Links
      >      GrizHFMinimill-unsubscribe@yahoogroups.com


      Do you Yahoo!?
      Win a $20,000 Career Makeover at Yahoo! HotJobs 

    • Show all 11 messages in this topic