Loading ...
Sorry, an error occurred while loading the content.

27522RE: [GrizHFMinimill] Sieg X1 Mill Belt Drive Conversion?

Expand Messages
  • gerry waclawiak
    Jul 22, 2014
      Hi John thanks for the reply but I think we are at cross purposes, I was posting about an X1 conversion on behalf of a member of a UK steam loco group who has that machine

      There is a UK stockist of x2 mini-mill belt conversions stocked by RPG Tools a chinese machinery importer and distributor. Some oftheir products appear to be Real Bull type mini lathes and mills. They do the belt conversion both as a kit or can supply a mill with one fitted. Prices are very competitive for the UK.

      I came across them a couple of years ago now at one of the UK's premier model engineering shows and posted the details on the group which I think is where Charlie got them!

      I made my own for my X2 type using the scrap box using modified Hoss Machine plans about 4.5 years ago, only commercial part was a Gates mini V belt.. A highly recommended conversion for the low rnd geared mills

      Gerry W
      Leeds UK

      To: GrizHFMinimill@yahoogroups.com
      From: GrizHFMinimill@yahoogroups.com
      Date: Mon, 21 Jul 2014 21:41:01 -0700
      Subject: Re: [GrizHFMinimill] Sieg X1 Mill Belt Drive Conversion?


      Hi Gerry
      I believe there is a company in the UK,that does mini mill belt conversions.
      If you contact Charlie Levinski in New Jersey,he bought the complete unit from them,i am sure he will help you.
      Send him an email 


      On Tuesday, July 22, 2014 1:25 AM, "Joe Blount joe.blount@... [GrizHFMinimill]" <GrizHFMinimill@yahoogroups.com> wrote:

      Here's a discussion thread related to what I did on my X2.

      Here are photos.

      There are no written plans for what I did, I made it up as I went along.
      I am using one of the belts I linked to in the thread.  I don't have many hours on it yet, but so far it seems to be holding up great.

      Basically, I bought a treadmill motor on Ebay that came with the AC->DC speed control, then made everything to fit it.
      I have  a G0602 lathe, which I used to make the pulleys.

      It has 3 ratios, which I selected based on:
        - the available belt size I could find
        - the smallest pulley diameter I thought I could get away with
        - the biggest pulley diameter I have room for


      On 7/15/2014 4:08 PM, gerry waclawiak gerrywac@... [GrizHFMinimill] wrote:
      I am posting to enquire about the little brother of the the mini-mill (Sieg X2 based) the rather smaller X1.

      In addition to being a member of several mini-lathe and mill groups I also belong to a primarily UK group building small scale steam locos (where my own mill and lathe come in) and one of the members has an X1 with broken gears and wanted to know if anyone knew of either a belt drive conversion, plans for one or alternatively a source of replacement metal gears

      As this is a rather more specialised group I just wanted to ask if anyone here can help out with some info

      look forward to hearing from you

      Gerry W
      Leeds Uk

    • Show all 13 messages in this topic