Loading ...
Sorry, an error occurred while loading the content.

Re: [GenesisRadio] Firmware installation/update Phase 4

Expand Messages
  • Joel Black
    Either go all the way down to the bottom of the Phase 4 build page under Troubleshooting or, using the main Genesis page, you can click on the link for the
    Message 1 of 4 , Jun 1, 2011
    • 0 Attachment
      Either go all the way down to the bottom of the Phase 4 build page under "Troubleshooting" or, using the main Genesis page, you can click on the link for the "Phase 4-A:  Firmware Update."

      73,
      Joel - W4JBB

      On 6/1/2011 3:38 PM, terry2 wrote:
      G’day People,
                              the phase 4 voltage checks, seem okay 12.7v on both SV1PA & SV2PA
                              with 0.03v where there should be 0.00v. As I am using 13.8 volts not 12v
                              I think that’s okay. Before I can go further I need to find the instructions
                              for loading new firmware.    
                       
                              I’ve been looking for the instruction on how to update/install new firmware,
                              can someone point me in the right direction please.
       
      Terry>
      VK2KDK

      No virus found in this message.
      Checked by AVG - www.avg.com
      Version: 10.0.1204 / Virus Database: 1509/3672 - Release Date: 05/31/11


      -- 
      Joel
      
      "Common sense is like deodorant...
      Those who need it most don't use it."
      --Unknown
    • Joel Black
      Oh, I forgot, I used some computer headphones for that phase. You ll know what I m talking about when you see it. They worked just as described. 73, Joel -
      Message 2 of 4 , Jun 1, 2011
      • 0 Attachment
        Oh, I forgot, I used some computer headphones for that phase.  You'll know what I'm talking about when you see it.  They worked just as described.

        73,
        Joel - W4JBB

        On 6/1/2011 3:38 PM, terry2 wrote:
        G’day People,
                                the phase 4 voltage checks, seem okay 12.7v on both SV1PA & SV2PA
                                with 0.03v where there should be 0.00v. As I am using 13.8 volts not 12v
                                I think that’s okay. Before I can go further I need to find the instructions
                                for loading new firmware.    
                         
                                I’ve been looking for the instruction on how to update/install new firmware,
                                can someone point me in the right direction please.
         
        Terry>
        VK2KDK

        No virus found in this message.
        Checked by AVG - www.avg.com
        Version: 10.0.1204 / Virus Database: 1509/3672 - Release Date: 05/31/11


        -- 
        Joel
        
        "Common sense is like deodorant...
        Those who need it most don't use it."
        --Unknown
      • terry2
        Thanks Joel. Terry vk2kdk Either go all the way down to the bottom of the Phase 4 build page under Troubleshooting or, using the main Genesis page, you can
        Message 3 of 4 , Jun 2, 2011
        • 0 Attachment
          Thanks Joel. 
           
          Terry> vk2kdk
           
           
           

          Either go all the way down to the bottom of the Phase 4 build page under "Troubleshooting" or, using the main Genesis page, you can click on the link for the "Phase 4-A:  Firmware Update."

          73,
          Joel - W4JBB

          On 6/1/2011 3:38 PM, terry2 wrote:

          G’day People,
                                  the phase 4 voltage checks, seem okay 12.7v on both SV1PA & SV2PA
                                  with 0.03v where there should be 0.00v. As I am using 13.8 volts not 12v
                                  I think that’s okay. Before I can go further I need to find the instructions
                                  for loading new firmware.    
                           
                                  I’ve been looking for the instruction on how to update/install new firmware,
                                  can someone point me in the right direction please.
           
          Terry>
          VK2KDK

           

        Your message has been successfully submitted and would be delivered to recipients shortly.