Loading ...
Sorry, an error occurred while loading the content.

Re: G59 serial 017 and WSPR

Expand Messages
  • herr_kaleun
    See this settings: http://www.genesisradio.com.au/yt1dl/wspr.shtml Virtual com port can be downloaded from
    Message 1 of 8 , Nov 2, 2010
    • 0 Attachment
      See this settings:
      http://www.genesisradio.com.au/yt1dl/wspr.shtml

      Virtual com port can be downloaded from http://www.genesis.com.au/yt1dl/N8VBvCOMSetup-226a.exe


      vy 73 de YT1DK, Dusan

      --- In GenesisRadio@yahoogroups.com, Marc Pauwels <sibelius@...> wrote:
      >
      > ok Goran,
      >
      > big test tonight !!
      >
      > marc
      >
      > Sibelius bvba
      > Nobels Peelmanstraat 4
      > 9100 Sint-Niklaas
      > tel 03/776 23 79
      > fax 03/ 777 84 60
      > www.sibelius-graphics.be
      > sibelius@...
      > skypename: sibelius01
      >
      >
      >
      >
      > On 02 Nov 2010, at 08:39, yt7pwr2002 wrote:
      >
      > > Direct PTT is even more simpler to setup.You need N8VB virtual COM
      > > port driver or similar.Connect two ports in configuration program
      > > and in GSDR use PTT Control instead of CAT Control(choose between
      > > DTR and RTS pins for control).This PTT method is recommended for
      > > external programs(like HRD,WinPSK...).
      > >
      > > 73 yt7pwr
      > >
      > > --- In GenesisRadio@yahoogroups.com, Marc Pauwels <sibelius@>
      > > wrote:
      > > >
      > > > Tnx Goran, CAT connection and WSPR version 2,1 works with me
      > > > intermittently : after some time I loose the connection between WSPR
      > > > and G59 - sometimes it works fine, but nevere longer than about 5
      > > - 8
      > > > minutes - Direct PTT control I have not been able to get that
      > > working
      > > > yet.
      > > >
      > > > I'll try intalling XP SP3 and see.
      > > >
      > > > Vox : that explains it!
      > > >
      > > > 73
      > > > marc
      > > > ON4EZ
      > > >
      > > > Sibelius bvba
      > > > Nobels Peelmanstraat 4
      > > > 9100 Sint-Niklaas
      > > > tel 03/776 23 79
      > > > fax 03/ 777 84 60
      > > > www.sibelius-graphics.be
      > > > sibelius@
      > > > skypename: sibelius01
      > > >
      > > >
      > > >
      > > >
      > > > On 31 Oct 2010, at 22:46, yt7pwr2002 wrote:
      > > >
      > > > > I having problem with new WSPR 2.1(need more time for tests).You
      > > > > can send PTT command direct or via CAT protocol.Direct is working
      > > > > fine but CAT gives error.WSPR use hamlib for Flex radio(still in
      > > > > early develop phase).
      > > > > Abou VOX:you need one sound card with 4 inputs(like Delta 44) or
      > > > > two with 2 inputs.In configuration with two cards main process I/Q
      > > > > from radio and VAC deals with microphone and speaker.Open VAC
      > > > > settings and point Input to mic device(you must set manually
      > > mic as
      > > > > source of signal) and Output to speaker device.Start VAC,VOX and
      > > > > watch VU-meter moving underneath VOX slider(if everything is set
      > > > > correctly).
      > > > >
      > > > > 73 yt7pwr
      > > > >
      > > > > --- In GenesisRadio@yahoogroups.com, Marc Pauwels <sibelius@>
      > > > > wrote:
      > > > > >
      > > > > > Goran,
      > > > > >
      > > > > > try the WSPR 2.1 - has support for softrock, phase correction,
      > > > > > etc ... and most important : doesn't crash when going on
      > > transmit -
      > > > > > download llink in attached pdf - this brings me to another
      > > point :
      > > > > >
      > > > > > my VOX control doesn't work ! II can check or uncheck any
      > > box, it
      > > > > > never works ? what am I forgetting ?
      > > > > >
      > > > > > Have a nice WE
      > > > > >
      > > > > > marcc
      > > > > > ON4EZ
      > > > > >
      > > > > >
      > > > > > Sibelius bvba
      > > > > > Nobels Peelmanstraat 4
      > > > > > 9100 Sint-Niklaas
      > > > > > tel 03/776 23 79
      > > > > > fax 03/ 777 84 60
      > > > > > www.sibelius-graphics.be
      > > > > > sibelius@
      > > > > > skypename: sibelius01
      > > > > >
      > > > >
      > > > >
      > > > >
      > > >
      > >
      > >
      > >
      >
    • Marc Pauwels
      Tasa, Goran, attached WSPR reports from last night on 80m - bear in mind my antenna setup : shorted vertical, one radial pointing W, one meter above ground!
      Message 2 of 8 , Dec 15, 2010
      Tasa,  Goran,

      attached WSPR reports from last night on 80m - bear in mind my antenna setup : shorted vertical, one radial pointing W, one meter above ground! (I really
      have to do something about that SOON !!!)
      (I 
    • Johnny Matlock
      Good Job Marc! WSPR is lots of fun. 72 73 Johnny AC0BQ
      Message 3 of 8 , Dec 16, 2010
      • 0 Attachment
        Good Job Marc!
        WSPR is lots of fun.
        72 73
        Johnny AC0BQ

        2010/12/16 Marc Pauwels <sibelius@...>:
        > Tasa,  Goran,
        > attached WSPR reports from last night on 80m - bear in mind my antenna setup
        > : shorted vertical, one radial pointing W, one meter above ground! (I really
        > have to do something about that SOON !!!)
        > (I
        >
        > bout
        > 73
        > marc
        > ON4EZ
        >
        >
        >
        >
        >
        >
        >     Sibelius bvba
        >     Nobels Peelmanstraat 4
        >     9100 Sint-Niklaas
        >     tel 03/776 23 79
        >     fax 03/ 777 84 60
        >     www.sibelius-graphics.be
        >     sibelius@...
        >     skypename: sibelius01
        > Wij zijn gesloten van 24 december tot en met 3 januari 2011
        >
        >
        >
        >
        >
      Your message has been successfully submitted and would be delivered to recipients shortly.