Loading ...
Sorry, an error occurred while loading the content.
 

Re: [GenesisRadio] G11 not work

Expand Messages
  • Carlos Alberto
    Hi Bruce... Does it say Boot mode in flashprogrammer? YES is Boot Does it say connected! at the bottom? YES is connected Then click erase, the write..
    Message 1 of 14 , Jul 23, 2013
     Hi Bruce...

    Does it say "Boot" mode in flashprogrammer?  YES is "Boot"
    Does it say "connected!" at the bottom?  YES is connected
     
    Then click erase, the write..  I do
     
    Does the connected go from connected to disconnected, then back to connected again?
    And now mode says "Firmware"?  Yes ... After upload, disconnect and go to firmware...
     
     
    If none or some of this is NOT true...  All this is correct, but not listen nothing.
     
    Are you POSITIVE, that your USB port is USB2.0, and NOT USB1.1 ?
    did you try a different USB cable ( short one) Yes... The USB is 2.0


      I have in the  folder GSDR,  4 files of firmware:
     G11firmware.bin
     G11firmware_extATU.bin
     G59firmware.bin
     G59firmware_extATU.bin

       I'm using the G11firmware.bin... Ver. 0.14

      The G59firmware is  ver. 1.19

       With G11firmware, the button  is green, but not receive.

        Please, see the attach.

        
    73
     


    2013/7/22 Bruce kf1z <kf1z@...>
     

    First off, we need to see why USB is not working.
     
    When you power down the board,
    Ground both paddle connections to ground....
    power the board, wait 5-10 secons, unground the paddles....
     
    Start G11 flashproggrammer.....
     
    Does it say "Boot" mode in flashprogrammer?
    Does it say "connected!" at the bottom?
     
    Then click erase, the write..
     
    Does the connected go from connected to disconnected, then back to connected again?
    And now mode says "Firmware"?
     
     
    If none or some of this is NOT true...
     
    Are you POSITIVE, that your USB port is USB2.0, and NOT USB1.1 ?
    did you try a different USB cable ( short one)
     
    BRuce
     
     
     
     
    Sent: Monday, July 22, 2013 11:16 AM
    Subject: Re: [GenesisRadio] G11 not work [4 Attachments]
     
     

    Hi  Bruce... 73...
     
    No... The button "USB" is red..
     
    I sent  you  any  pictures of my board...
     
     
    TU...
     
     


    2013/7/22 Bruce kf1z <kf1z@...>
     
    In GSDR "about" should definitely show correct firmware version when flashprogrammer  is closed.
     
    Do you still see a green "USB" button ? or is it red?
     
    Please email or post some nice clear pictures of the board.
     
    BRuce
    kf1z
     
     
    Sent: Monday, July 22, 2013 9:03 AM
    Subject: [GenesisRadio] G11 not work
     
     
    Dear friends .. 73
     
      I have been in touch with Bruce, but I decided to post my problem with the G11 Kit, it may be that someone here has had the same problem and have been able to resolve.
     
      I started assembling my G11 (+ multiband) and the tests were correct, to the point of reception test before installing the filters ...
     
       I am not able to hear any station, but I hear white noise.
     
      Setup:
     
      Dell Notebook
      Antenna RX2: A piece of wire of 1 meter.
     
      I noticed that the boot load mode when I upgrade the firmware, the GSDR shows me in "about" the correct version of the firmware, but if I exit the boot load the GSDR not show me more version. Is this correct?
     
       Can anyone help me solve this mystery??
     
        TU / 73
    Carlos Alberto - PY4XX
     
    --
     


     
    --
    Carlos Alberto

     PY4XX - PT4C - PX4X                                   
         
    Without CW I'm just CB.
     
    Araucária DX Group Member
     
    Rio DX Group Member
     
    JEDI DX Team Member
     
    CTC Member




    --
    Carlos Alberto

     PY4XX - PT4C - PX4X                                    
          
    Without CW I'm just CB.

    Araucária DX Group Member

    Rio DX Group Member

    JEDI DX Team Member

    CTC Member
  • Bruce kf1z
    So you now are able to see firmware version in about And USB button is now green? Please send a screenshot of the panadapteer window, and, the soundcard
    Message 2 of 14 , Jul 23, 2013
      So you now are able to see firmware version in "about"
      And USB button is now green?
       
      Please send a screenshot of the panadapteer window,
      and, the soundcard setup screen in gsdr
       
      bruce
       
       
      Sent: Tuesday, July 23, 2013 8:11 AM
      Subject: Re: [GenesisRadio] G11 not work [3 Attachments]
       
       

      Hi Bruce...
       
      Does it say "Boot" mode in flashprogrammer? YES is "Boot"
      Does it say "connected!" at the bottom?  YES is connected
       
      Then click erase, the write..  I do
       
      Does the connected go from connected to disconnected, then back to connected again?
      And now mode says "Firmware"?  Yes ... After upload, disconnect and go to firmware...
       
       
      If none or some of this is NOT true...  All this is correct, but not listen nothing.
       
      Are you POSITIVE, that your USB port is USB2.0, and NOT USB1.1 ?
      did you try a different USB cable ( short one) Yes... The USB is 2.0


        I have in the  folder GSDR,  4 files of firmware:
      G11firmware.bin
      G11firmware_extATU.bin
      G59firmware.bin
      G59firmware_extATU.bin

         I'm using the G11firmware.bin... Ver. 0.14

        The G59firmware is  ver. 1.19

         With G11firmware, the button  is green, but not receive.

          Please, see the attach.

         
      73
       


      2013/7/22 Bruce kf1z <kf1z@...>
       
      First off, we need to see why USB is not working.
       
      When you power down the board,
      Ground both paddle connections to ground....
      power the board, wait 5-10 secons, unground the paddles....
       
      Start G11 flashproggrammer.....
       
      Does it say "Boot" mode in flashprogrammer?
      Does it say "connected!" at the bottom?
       
      Then click erase, the write..
       
      Does the connected go from connected to disconnected, then back to connected again?
      And now mode says "Firmware"?
       
       
      If none or some of this is NOT true...
       
      Are you POSITIVE, that your USB port is USB2.0, and NOT USB1.1 ?
      did you try a different USB cable ( short one)
       
      BRuce
       
       
       
       
      Sent: Monday, July 22, 2013 11:16 AM
      Subject: Re: [GenesisRadio] G11 not work [4 Attachments]
       
       
      Hi  Bruce... 73...
       
      No... The button "USB" is red..
       
      I sent  you  any  pictures of my board...
       
       
      TU...
       
       


      2013/7/22 Bruce kf1z <kf1z@...>
       
      In GSDR "about" should definitely show correct firmware version when flashprogrammer  is closed.
       
      Do you still see a green "USB" button ? or is it red?
       
      Please email or post some nice clear pictures of the board.
       
      BRuce
      kf1z
       
       
      Sent: Monday, July 22, 2013 9:03 AM
      Subject: [GenesisRadio] G11 not work
       
       
      Dear friends .. 73
       
        I have been in touch with Bruce, but I decided to post my problem with the G11 Kit, it may be that someone here has had the same problem and have been able to resolve.
       
        I started assembling my G11 (+ multiband) and the tests were correct, to the point of reception test before installing the filters ...
       
         I am not able to hear any station, but I hear white noise.
       
        Setup:
       
        Dell Notebook
        Antenna RX2: A piece of wire of 1 meter.
       
        I noticed that the boot load mode when I upgrade the firmware, the GSDR shows me in "about" the correct version of the firmware, but if I exit the boot load the GSDR not show me more version. Is this correct?
       
         Can anyone help me solve this mystery??
       
          TU / 73
      Carlos Alberto - PY4XX
       
      --
       


       
      --
      Carlos Alberto

       PY4XX - PT4C - PX4X                                   
           
      Without CW I'm just CB.
       
      Araucária DX Group Member
       
      Rio DX Group Member
       
      JEDI DX Team Member
       
      CTC Member


       
      --
      Carlos Alberto

       PY4XX - PT4C - PX4X                                   
           
      Without CW I'm just CB.
       
      Araucária DX Group Member
       
      Rio DX Group Member
       
      JEDI DX Team Member
       
      CTC Member
    • Goran
      It is not critical error if no message text in About form (sometime need twice to open). Green USB is good sign. Relay (BPF or TX) clicking is confirmation
      Message 3 of 14 , Jul 23, 2013
        It is not critical error if no message text in About form (sometime need twice to open). Green USB is good sign. Relay (BPF or TX) clicking is confirmation PC->G11 direction, PTT (or any keyer command) will confirm G11->PC direction.


        73 yt7pwr


        --- In GenesisRadio@yahoogroups.com, "Bruce kf1z" <kf1z@...> wrote:
        >
        > So you now are able to see firmware version in "about"
        > And USB button is now green?
        >
        > Please send a screenshot of the panadapteer window,
        > and, the soundcard setup screen in gsdr
        >
        > bruce
        >
        >
        > From: Carlos Alberto
        > Sent: Tuesday, July 23, 2013 8:11 AM
        > To: GenesisRadio@yahoogroups.com
        > Subject: Re: [GenesisRadio] G11 not work [3 Attachments]
        >
        >
        > [Attachment(s) from Carlos Alberto included below]
        >
        >
        > Hi Bruce...
        >
        > Does it say "Boot" mode in flashprogrammer? YES is "Boot"
        > Does it say "connected!" at the bottom? YES is connected
        >
        > Then click erase, the write.. I do
        >
        > Does the connected go from connected to disconnected, then back to connected again?
        > And now mode says "Firmware"? Yes ... After upload, disconnect and go to firmware...
        >
        >
        > If none or some of this is NOT true... All this is correct, but not listen nothing.
        >
        > Are you POSITIVE, that your USB port is USB2.0, and NOT USB1.1 ?
        > did you try a different USB cable ( short one) Yes... The USB is 2.0
        >
        >
        >
        >
        > I have in the folder GSDR, 4 files of firmware:
        > G11firmware.bin
        > G11firmware_extATU.bin
        > G59firmware.bin
        > G59firmware_extATU.bin
        >
        >
        > I'm using the G11firmware.bin... Ver. 0.14
        >
        >
        > The G59firmware is ver. 1.19
        >
        >
        > With G11firmware, the button is green, but not receive.
        >
        >
        > Please, see the attach.
        >
        >
        >
        > 73
        >
        >
        >
        >
        > 2013/7/22 Bruce kf1z <kf1z@...>
        >
        >
        > First off, we need to see why USB is not working.
        >
        > When you power down the board,
        > Ground both paddle connections to ground....
        > power the board, wait 5-10 secons, unground the paddles....
        >
        > Start G11 flashproggrammer.....
        >
        > Does it say "Boot" mode in flashprogrammer?
        > Does it say "connected!" at the bottom?
        >
        > Then click erase, the write..
        >
        > Does the connected go from connected to disconnected, then back to connected again?
        > And now mode says "Firmware"?
        >
        >
        > If none or some of this is NOT true...
        >
        > Are you POSITIVE, that your USB port is USB2.0, and NOT USB1.1 ?
        > did you try a different USB cable ( short one)
        >
        > BRuce
        >
        >
        >
        >
        > From: Carlos Alberto
        > Sent: Monday, July 22, 2013 11:16 AM
        > To: GenesisRadio@yahoogroups.com
        > Subject: Re: [GenesisRadio] G11 not work [4 Attachments]
        >
        >
        > Hi Bruce... 73...
        >
        > No... The button "USB" is red..
        >
        > I sent you any pictures of my board...
        >
        >
        > TU...
        >
        >
        >
        >
        >
        > 2013/7/22 Bruce kf1z <kf1z@...>
        >
        >
        > In GSDR "about" should definitely show correct firmware version when flashprogrammer is closed.
        >
        > Do you still see a green "USB" button ? or is it red?
        >
        > Please email or post some nice clear pictures of the board.
        >
        > BRuce
        > kf1z
        >
        >
        > From: Carlos Alberto
        > Sent: Monday, July 22, 2013 9:03 AM
        > To: GenesisRadio@yahoogroups.com
        > Subject: [GenesisRadio] G11 not work
        >
        >
        > Dear friends .. 73
        >
        > I have been in touch with Bruce, but I decided to post my problem with the G11 Kit, it may be that someone here has had the same problem and have been able to resolve.
        >
        > I started assembling my G11 (+ multiband) and the tests were correct, to the point of reception test before installing the filters ...
        >
        > I am not able to hear any station, but I hear white noise.
        >
        > Setup:
        >
        > Dell Notebook
        > Antenna RX2: A piece of wire of 1 meter.
        >
        > I noticed that the boot load mode when I upgrade the firmware, the GSDR shows me in "about" the correct version of the firmware, but if I exit the boot load the GSDR not show me more version. Is this correct?
        >
        > Can anyone help me solve this mystery??
        >
        > TU / 73
        > Carlos Alberto - PY4XX
        >
        > --
        >
        >
        >
        >
        >
        >
        > --
        >
        > Carlos Alberto
        >
        >
        >
        > PY4XX - PT4C - PX4X
        >
        > Without CW I'm just CB.
        >
        > Araucária DX Group Member
        >
        > Rio DX Group Member
        >
        > JEDI DX Team Member
        >
        > CTC Member
        >
        >
        >
        >
        > --
        >
        > Carlos Alberto
        >
        >
        >
        > PY4XX - PT4C - PX4X
        >
        > Without CW I'm just CB.
        >
        > Araucária DX Group Member
        >
        > Rio DX Group Member
        >
        > JEDI DX Team Member
        >
        > CTC Member
        >
      • Carlos Alberto
        Hi Bruce... 73... Yes... Now I see the version in About og GSDR... But... The version is 0.1.4 and not 1.1.9 as G59firmware... it s correct ??? Pleas
        Message 4 of 14 , Jul 23, 2013
        Hi Bruce... 73... 
        Yes... Now I see the version in  "About" og  GSDR... 

         But... The version is  0.1.4 and  not  1.1.9 as G59firmware... it's correct ???

          Pleas see the pictures attached and the movie  in  http://youtu.be/rMhHB9zun5s..

         TU

          Carlos Alberto = PY4XX


        2013/7/23 Bruce kf1z <kf1z@...>
         

        So you now are able to see firmware version in "about"
        And USB button is now green?
         
        Please send a screenshot of the panadapteer window,
        and, the soundcard setup screen in gsdr
         
        bruce
         
         
        Sent: Tuesday, July 23, 2013 8:11 AM
        Subject: Re: [GenesisRadio] G11 not work [3 Attachments]
         
         

        Hi Bruce...
         
        Does it say "Boot" mode in flashprogrammer? YES is "Boot"
        Does it say "connected!" at the bottom?  YES is connected
         
        Then click erase, the write..  I do
         
        Does the connected go from connected to disconnected, then back to connected again?
        And now mode says "Firmware"?  Yes ... After upload, disconnect and go to firmware...
         
         
        If none or some of this is NOT true...  All this is correct, but not listen nothing.
         
        Are you POSITIVE, that your USB port is USB2.0, and NOT USB1.1 ?
        did you try a different USB cable ( short one) Yes... The USB is 2.0


          I have in the  folder GSDR,  4 files of firmware:
        G11firmware.bin
        G11firmware_extATU.bin
        G59firmware.bin
        G59firmware_extATU.bin

           I'm using the G11firmware.bin... Ver. 0.14

          The G59firmware is  ver. 1.19

           With G11firmware, the button  is green, but not receive.

            Please, see the attach.

           
        73
         


        2013/7/22 Bruce kf1z <kf1z@...>
         
        First off, we need to see why USB is not working.
         
        When you power down the board,
        Ground both paddle connections to ground....
        power the board, wait 5-10 secons, unground the paddles....
         
        Start G11 flashproggrammer.....
         
        Does it say "Boot" mode in flashprogrammer?
        Does it say "connected!" at the bottom?
         
        Then click erase, the write..
         
        Does the connected go from connected to disconnected, then back to connected again?
        And now mode says "Firmware"?
         
         
        If none or some of this is NOT true...
         
        Are you POSITIVE, that your USB port is USB2.0, and NOT USB1.1 ?
        did you try a different USB cable ( short one)
         
        BRuce
         
         
         
         
        Sent: Monday, July 22, 2013 11:16 AM
        Subject: Re: [GenesisRadio] G11 not work [4 Attachments]
         
         
        Hi  Bruce... 73...
         
        No... The button "USB" is red..
         
        I sent  you  any  pictures of my board...
         
         
        TU...
         
         


        2013/7/22 Bruce kf1z <kf1z@...>
         
        In GSDR "about" should definitely show correct firmware version when flashprogrammer  is closed.
         
        Do you still see a green "USB" button ? or is it red?
         
        Please email or post some nice clear pictures of the board.
         
        BRuce
        kf1z
         
         
        Sent: Monday, July 22, 2013 9:03 AM
        Subject: [GenesisRadio] G11 not work
         
         
        Dear friends .. 73
         
          I have been in touch with Bruce, but I decided to post my problem with the G11 Kit, it may be that someone here has had the same problem and have been able to resolve.
         
          I started assembling my G11 (+ multiband) and the tests were correct, to the point of reception test before installing the filters ...
         
           I am not able to hear any station, but I hear white noise.
         
          Setup:
         
          Dell Notebook
          Antenna RX2: A piece of wire of 1 meter.
         
          I noticed that the boot load mode when I upgrade the firmware, the GSDR shows me in "about" the correct version of the firmware, but if I exit the boot load the GSDR not show me more version. Is this correct?
         
           Can anyone help me solve this mystery??
         
            TU / 73
        Carlos Alberto - PY4XX
         
        --
         


         
        --
        Carlos Alberto

         PY4XX - PT4C - PX4X                                   
             
        Without CW I'm just CB.
         
        Araucária DX Group Member
         
        Rio DX Group Member
         
        JEDI DX Team Member
         
        CTC Member


         
        --
        Carlos Alberto

         PY4XX - PT4C - PX4X                                   
             
        Without CW I'm just CB.
         
        Araucária DX Group Member
         
        Rio DX Group Member
         
        JEDI DX Team Member
         
        CTC Member




        --
        Carlos Alberto

         PY4XX - PT4C - PX4X                                    
              
        Without CW I'm just CB.

        Araucária DX Group Member

        Rio DX Group Member

        JEDI DX Team Member

        CTC Member
      • Carlos Alberto
        Hi Goran... 73... Really, the G11 and PC is talking... When I press the keyer, the LED Red of Transmission lights. I Belive that the problem is only not
        Message 5 of 14 , Jul 23, 2013
          Hi Goran... 73...

          Really, the G11 and  PC is  talking...
           When I press the  keyer,  the LED Red of Transmission  lights.

           I Belive that  the problem is only  not receive...

           TU / 73...


          2013/7/23 Goran <yt7pwr@...>
           

          It is not critical error if no message text in About form (sometime need twice to open). Green USB is good sign. Relay (BPF or TX) clicking is confirmation PC->G11 direction, PTT (or any keyer command) will confirm G11->PC direction.

          73 yt7pwr



          --- In GenesisRadio@yahoogroups.com, "Bruce kf1z" <kf1z@...> wrote:
          >
          > So you now are able to see firmware version in "about"
          > And USB button is now green?
          >
          > Please send a screenshot of the panadapteer window,
          > and, the soundcard setup screen in gsdr
          >
          > bruce
          >
          >
          > From: Carlos Alberto
          > Sent: Tuesday, July 23, 2013 8:11 AM
          > To: GenesisRadio@yahoogroups.com
          > Subject: Re: [GenesisRadio] G11 not work [3 Attachments]
          >
          >
          > [Attachment(s) from Carlos Alberto included below]

          >
          >
          > Hi Bruce...
          >
          > Does it say "Boot" mode in flashprogrammer? YES is "Boot"
          > Does it say "connected!" at the bottom? YES is connected
          >
          > Then click erase, the write.. I do
          >
          > Does the connected go from connected to disconnected, then back to connected again?
          > And now mode says "Firmware"? Yes ... After upload, disconnect and go to firmware...
          >
          >
          > If none or some of this is NOT true... All this is correct, but not listen nothing.
          >
          > Are you POSITIVE, that your USB port is USB2.0, and NOT USB1.1 ?
          > did you try a different USB cable ( short one) Yes... The USB is 2.0
          >
          >
          >
          >
          > I have in the folder GSDR, 4 files of firmware:
          > G11firmware.bin
          > G11firmware_extATU.bin
          > G59firmware.bin
          > G59firmware_extATU.bin
          >
          >
          > I'm using the G11firmware.bin... Ver. 0.14
          >
          >
          > The G59firmware is ver. 1.19
          >
          >
          > With G11firmware, the button is green, but not receive.
          >
          >
          > Please, see the attach.
          >
          >
          >
          > 73
          >
          >
          >
          >
          > 2013/7/22 Bruce kf1z <kf1z@...>

          >
          >
          > First off, we need to see why USB is not working.
          >
          > When you power down the board,
          > Ground both paddle connections to ground....
          > power the board, wait 5-10 secons, unground the paddles....
          >
          > Start G11 flashproggrammer.....
          >
          > Does it say "Boot" mode in flashprogrammer?
          > Does it say "connected!" at the bottom?
          >
          > Then click erase, the write..
          >
          > Does the connected go from connected to disconnected, then back to connected again?
          > And now mode says "Firmware"?
          >
          >
          > If none or some of this is NOT true...
          >
          > Are you POSITIVE, that your USB port is USB2.0, and NOT USB1.1 ?
          > did you try a different USB cable ( short one)
          >
          > BRuce
          >
          >
          >
          >
          > From: Carlos Alberto
          > Sent: Monday, July 22, 2013 11:16 AM
          > To: GenesisRadio@yahoogroups.com
          > Subject: Re: [GenesisRadio] G11 not work [4 Attachments]
          >
          >
          > Hi Bruce... 73...
          >
          > No... The button "USB" is red..
          >
          > I sent you any pictures of my board...
          >
          >
          > TU...
          >
          >
          >
          >
          >
          > 2013/7/22 Bruce kf1z <kf1z@...>

          >
          >
          > In GSDR "about" should definitely show correct firmware version when flashprogrammer is closed.
          >
          > Do you still see a green "USB" button ? or is it red?
          >
          > Please email or post some nice clear pictures of the board.
          >
          > BRuce
          > kf1z
          >
          >
          > From: Carlos Alberto
          > Sent: Monday, July 22, 2013 9:03 AM
          > To: GenesisRadio@yahoogroups.com
          > Subject: [GenesisRadio] G11 not work
          >
          >
          > Dear friends .. 73
          >
          > I have been in touch with Bruce, but I decided to post my problem with the G11 Kit, it may be that someone here has had the same problem and have been able to resolve.
          >
          > I started assembling my G11 (+ multiband) and the tests were correct, to the point of reception test before installing the filters ...
          >
          > I am not able to hear any station, but I hear white noise.
          >
          > Setup:
          >
          > Dell Notebook
          > Antenna RX2: A piece of wire of 1 meter.
          >
          > I noticed that the boot load mode when I upgrade the firmware, the GSDR shows me in "about" the correct version of the firmware, but if I exit the boot load the GSDR not show me more version. Is this correct?
          >
          > Can anyone help me solve this mystery??
          >
          > TU / 73
          > Carlos Alberto - PY4XX
          >
          > --
          >
          >
          >
          >
          >
          >
          > --
          >
          > Carlos Alberto
          >
          >
          >
          > PY4XX - PT4C - PX4X
          >
          > Without CW I'm just CB.
          >
          > Araucária DX Group Member
          >
          > Rio DX Group Member
          >
          > JEDI DX Team Member
          >
          > CTC Member
          >
          >
          >
          >
          > --
          >
          > Carlos Alberto
          >
          >
          >
          > PY4XX - PT4C - PX4X
          >
          > Without CW I'm just CB.
          >
          > Araucária DX Group Member
          >
          > Rio DX Group Member
          >
          > JEDI DX Team Member
          >
          > CTC Member
          >




          --
          Carlos Alberto

           PY4XX - PT4C - PX4X                                    
                
          Without CW I'm just CB.

          Araucária DX Group Member

          Rio DX Group Member

          JEDI DX Team Member

          CTC Member
        • Bruce kf1z
          G59 and G11 firmware are not interchangeable. The version number difference is irrelevant BRuce From: Carlos Alberto Sent: Tuesday, July 23, 2013 1:59 PM To:
          Message 6 of 14 , Jul 23, 2013
            G59 and G11 firmware are not interchangeable.
             
            The version number difference is irrelevant
             
            BRuce
             
             
            Sent: Tuesday, July 23, 2013 1:59 PM
            Subject: Re: [GenesisRadio] G11 not work [3 Attachments]
             
             

            Hi Bruce... 73... 
            Yes... Now I see the version in  "About" og  GSDR...
             
            But... The version is  0.1.4 and  not  1.1.9 as G59firmware... it's correct ???
             
              Pleas see the pictures attached and the movie  in  http://youtu.be/rMhHB9zun5s..
             
            TU
             
              Carlos Alberto = PY4XX


            2013/7/23 Bruce kf1z <kf1z@...>
             
            So you now are able to see firmware version in "about"
            And USB button is now green?
             
            Please send a screenshot of the panadapteer window,
            and, the soundcard setup screen in gsdr
             
            bruce
             
             
            Sent: Tuesday, July 23, 2013 8:11 AM
            Subject: Re: [GenesisRadio] G11 not work [3 Attachments]
             
             
            Hi Bruce...
             
            Does it say "Boot" mode in flashprogrammer? YES is "Boot"
            Does it say "connected!" at the bottom?  YES is connected
             
            Then click erase, the write..  I do
             
            Does the connected go from connected to disconnected, then back to connected again?
            And now mode says "Firmware"?  Yes ... After upload, disconnect and go to firmware...
             
             
            If none or some of this is NOT true...  All this is correct, but not listen nothing.
             
            Are you POSITIVE, that your USB port is USB2.0, and NOT USB1.1 ?
            did you try a different USB cable ( short one) Yes... The USB is 2.0


              I have in the  folder GSDR,  4 files of firmware:
            G11firmware.bin
            G11firmware_extATU.bin
            G59firmware.bin
            G59firmware_extATU.bin

               I'm using the G11firmware.bin... Ver. 0.14

              The G59firmware is  ver. 1.19

               With G11firmware, the button  is green, but not receive.

                Please, see the attach.

               
            73
             


            2013/7/22 Bruce kf1z <kf1z@...>
             
            First off, we need to see why USB is not working.
             
            When you power down the board,
            Ground both paddle connections to ground....
            power the board, wait 5-10 secons, unground the paddles....
             
            Start G11 flashproggrammer.....
             
            Does it say "Boot" mode in flashprogrammer?
            Does it say "connected!" at the bottom?
             
            Then click erase, the write..
             
            Does the connected go from connected to disconnected, then back to connected again?
            And now mode says "Firmware"?
             
             
            If none or some of this is NOT true...
             
            Are you POSITIVE, that your USB port is USB2.0, and NOT USB1.1 ?
            did you try a different USB cable ( short one)
             
            BRuce
             
             
             
             
            Sent: Monday, July 22, 2013 11:16 AM
            Subject: Re: [GenesisRadio] G11 not work [4 Attachments]
             
             
            Hi  Bruce... 73...
             
            No... The button "USB" is red..
             
            I sent  you  any  pictures of my board...
             
             
            TU...
             
             


            2013/7/22 Bruce kf1z <kf1z@...>
             
            In GSDR "about" should definitely show correct firmware version when flashprogrammer  is closed.
             
            Do you still see a green "USB" button ? or is it red?
             
            Please email or post some nice clear pictures of the board.
             
            BRuce
            kf1z
             
             
            Sent: Monday, July 22, 2013 9:03 AM
            Subject: [GenesisRadio] G11 not work
             
             
            Dear friends .. 73
             
              I have been in touch with Bruce, but I decided to post my problem with the G11 Kit, it may be that someone here has had the same problem and have been able to resolve.
             
              I started assembling my G11 (+ multiband) and the tests were correct, to the point of reception test before installing the filters ...
             
               I am not able to hear any station, but I hear white noise.
             
              Setup:
             
              Dell Notebook
              Antenna RX2: A piece of wire of 1 meter.
             
              I noticed that the boot load mode when I upgrade the firmware, the GSDR shows me in "about" the correct version of the firmware, but if I exit the boot load the GSDR not show me more version. Is this correct?
             
               Can anyone help me solve this mystery??
             
                TU / 73
            Carlos Alberto - PY4XX
             
            --
             


             
            --
            Carlos Alberto

             PY4XX - PT4C - PX4X                                   
                 
            Without CW I'm just CB.
             
            Araucária DX Group Member
             
            Rio DX Group Member
             
            JEDI DX Team Member
             
            CTC Member


             
            --
            Carlos Alberto

             PY4XX - PT4C - PX4X                                   
                 
            Without CW I'm just CB.
             
            Araucária DX Group Member
             
            Rio DX Group Member
             
            JEDI DX Team Member
             
            CTC Member


             
            --
            Carlos Alberto

             PY4XX - PT4C - PX4X                                   
                 
            Without CW I'm just CB.
             
            Araucária DX Group Member
             
            Rio DX Group Member
             
            JEDI DX Team Member
             
            CTC Member
          • Goran
            You can use very simple test method: with finger (or with small screwdriver or sharp needle) touch points in I/Q chain starting from G11 AF output (sound card
            Message 7 of 14 , Jul 23, 2013
              You can use very simple test method: with finger (or with small screwdriver or sharp needle) touch points in I/Q chain starting from G11 AF output (sound card input). Entire spectrum must react in chaotic way. If you have small AF signal generator inject very weak, several KHz sine signal and follow I/Q AF amplifier chain up to receiver mixer. Then check mixer and BPF (you need RF signal generator). Small surplus Xtal oscillator from old PC (4-20MHz) will do job just fine. Did you check Si570 frequency?


              73 yt7pwr


              --- In GenesisRadio@yahoogroups.com, Carlos Alberto <py4xx@...> wrote:
              >
              > Hi Goran... 73...
              >
              > Really, the G11 and PC is talking...
              > When I press the keyer, the LED Red of Transmission lights.
              >
              > I Belive that the problem is only not receive...
              >
              > TU / 73...
              >
            • Carlos Alberto
              Hi Goran... Well... My counter is not very precision. I builded the Counter of DL4YHF but show me approximate the value... Where must be 56.080Mhz I have
              Message 8 of 14 , Jul 23, 2013
                Hi Goran...

                 Well... My  counter  is not very precision. I builded the  Counter of DL4YHF but show me approximate the value...

                 Where must be  56.080Mhz  I have 56.040Mhz +/- 

                 Now, a good news...  My G11 is  listen stations, but....  ( always have a but ... hi hi ) the audio is very very  low...
                 
                  I perceived too, that  G11 is slightly off frequency.

                 I leaved my other radio in a frequency ( 50.100Mhz ) sending  CW beacon with 5W  and the G11  received in  50.094Mhz.

                 This may be due to the frequency SI570 be even a little off ?

                  I believe that now missing bit, to put it correctly, and I can continue with the mounting the Kit ..

                 TU / 73... 

                 Carlos Alberto - PY4XX


                2013/7/23 Goran <yt7pwr@...>
                 

                You can use very simple test method: with finger (or with small screwdriver or sharp needle) touch points in I/Q chain starting from G11 AF output (sound card input). Entire spectrum must react in chaotic way. If you have small AF signal generator inject very weak, several KHz sine signal and follow I/Q AF amplifier chain up to receiver mixer. Then check mixer and BPF (you need RF signal generator). Small surplus Xtal oscillator from old PC (4-20MHz) will do job just fine. Did you check Si570 frequency?

                73 yt7pwr



                --- In GenesisRadio@yahoogroups.com, Carlos Alberto <py4xx@...> wrote:
                >
                > Hi Goran... 73...
                >
                > Really, the G11 and PC is talking...
                > When I press the keyer, the LED Red of Transmission lights.
                >
                > I Belive that the problem is only not receive...
                >
                > TU / 73...
                >




                --
                Carlos Alberto

                 PY4XX - PT4C - PX4X                                    
                      
                Without CW I'm just CB.

                Araucária DX Group Member

                Rio DX Group Member

                JEDI DX Team Member

                CTC Member
              • Bruce kf1z
                ALL Si570 need to be calibrated to be on the correct frequency. the audio being low.... well, windows volume controls, the AF and RF sliders in GSDR all should
                Message 9 of 14 , Jul 23, 2013
                  ALL Si570 need to be calibrated to be on the correct frequency.
                   
                  the audio being low.... well, windows volume controls, the AF and RF sliders in GSDR all should help
                   
                  for Si570 calibration see here:
                   
                   
                   
                  Glad you are making progress!
                   
                  bruce
                  kf1z
                   
                   
                  Sent: Tuesday, July 23, 2013 9:39 PM
                  Subject: Re: [GenesisRadio] Re: G11 not work
                   
                   

                  Hi Goran...
                   
                  Well... My  counter  is not very precision. I builded the  Counter of DL4YHF but show me approximate the value...
                   
                  Where must be  56.080Mhz  I have 56.040Mhz +/-
                   
                  Now, a good news...  My G11 is  listen stations, but....  ( always have a but ... hi hi ) the audio is very very  low...
                   
                    I perceived too, that  G11 is slightly off frequency.
                   
                  I leaved my other radio in a frequency ( 50.100Mhz ) sending  CW beacon with 5W  and the G11  received in  50.094Mhz.
                   
                  This may be due to the frequency SI570 be even a little off ?
                   
                    I believe that now missing bit, to put it correctly, and I can continue with the mounting the Kit ..
                   
                  TU / 73...
                   
                  Carlos Alberto - PY4XX


                  2013/7/23 Goran <yt7pwr@...>
                   

                  You can use very simple test method: with finger (or with small screwdriver or sharp needle) touch points in I/Q chain starting from G11 AF output (sound card input). Entire spectrum must react in chaotic way. If you have small AF signal generator inject very weak, several KHz sine signal and follow I/Q AF amplifier chain up to receiver mixer. Then check mixer and BPF (you need RF signal generator). Small surplus Xtal oscillator from old PC (4-20MHz) will do job just fine. Did you check Si570 frequency?

                  73 yt7pwr



                  --- In mailto:GenesisRadio%40yahoogroups.com, Carlos Alberto <py4xx@...> wrote:
                  >
                  > Hi Goran... 73...
                  >
                  > Really, the G11 and PC is talking...
                  > When I press the keyer, the LED Red of Transmission lights.
                  >
                  > I Belive that the problem is only not receive...
                  >
                  > TU / 73...
                  >



                   
                  --
                  Carlos Alberto

                   PY4XX - PT4C - PX4X                                   
                       
                  Without CW I'm just CB.
                   
                  Araucária DX Group Member
                   
                  Rio DX Group Member
                   
                  JEDI DX Team Member
                   
                  CTC Member
                • Carlos Alberto
                  Hi Bruce... GM... I expressed myself badly ... Where written audio signal, meant, RF signal ... The volume of Audio Speaker is at the end and also GSDR. I put
                  Message 10 of 14 , Jul 24, 2013
                    Hi Bruce...  GM...

                     I expressed myself badly ... Where written audio signal, meant, RF signal ...

                      The volume of Audio Speaker is at the end and also GSDR.

                      I put my FT-2000 in the frequency of the station, and listen well, but GSDR, even with the total volume in both the computer and GSDR RF Gain maximum also the audio station was very low.

                      I am now with a Delta Loop antenna for 40M in GSDR. So I believe the problem is not the antenna.
                      Sorry I have expressed myself badly ...

                      73 / TU

                      Carlos Alberto-PY4XX


                    2013/7/24 Bruce kf1z <kf1z@...>
                     

                    ALL Si570 need to be calibrated to be on the correct frequency.
                     
                    the audio being low.... well, windows volume controls, the AF and RF sliders in GSDR all should help
                     
                    for Si570 calibration see here:
                     
                     
                     
                    Glad you are making progress!
                     
                    bruce
                    kf1z
                     
                     
                    Sent: Tuesday, July 23, 2013 9:39 PM
                    Subject: Re: [GenesisRadio] Re: G11 not work
                     
                     

                    Hi Goran...
                     
                    Well... My  counter  is not very precision. I builded the  Counter of DL4YHF but show me approximate the value...
                     
                    Where must be  56.080Mhz  I have 56.040Mhz +/-
                     
                    Now, a good news...  My G11 is  listen stations, but....  ( always have a but ... hi hi ) the audio is very very  low...
                     
                      I perceived too, that  G11 is slightly off frequency.
                     
                    I leaved my other radio in a frequency ( 50.100Mhz ) sending  CW beacon with 5W  and the G11  received in  50.094Mhz.
                     
                    This may be due to the frequency SI570 be even a little off ?
                     
                      I believe that now missing bit, to put it correctly, and I can continue with the mounting the Kit ..
                     
                    TU / 73...
                     
                    Carlos Alberto - PY4XX


                    2013/7/23 Goran <yt7pwr@...>
                     

                    You can use very simple test method: with finger (or with small screwdriver or sharp needle) touch points in I/Q chain starting from G11 AF output (sound card input). Entire spectrum must react in chaotic way. If you have small AF signal generator inject very weak, several KHz sine signal and follow I/Q AF amplifier chain up to receiver mixer. Then check mixer and BPF (you need RF signal generator). Small surplus Xtal oscillator from old PC (4-20MHz) will do job just fine. Did you check Si570 frequency?

                    73 yt7pwr



                    --- In mailto:GenesisRadio%40yahoogroups.com, Carlos Alberto <py4xx@...> wrote:
                    >
                    > Hi Goran... 73...
                    >
                    > Really, the G11 and PC is talking...
                    > When I press the keyer, the LED Red of Transmission lights.
                    >
                    > I Belive that the problem is only not receive...
                    >
                    > TU / 73...
                    >



                     
                    --
                    Carlos Alberto

                     PY4XX - PT4C - PX4X                                   
                         
                    Without CW I'm just CB.
                     
                    Araucária DX Group Member
                     
                    Rio DX Group Member
                     
                    JEDI DX Team Member
                     
                    CTC Member




                    --
                    Carlos Alberto

                     PY4XX - PT4C - PX4X                                    
                          
                    Without CW I'm just CB.

                    Araucária DX Group Member

                    Rio DX Group Member

                    JEDI DX Team Member

                    CTC Member
                  Your message has been successfully submitted and would be delivered to recipients shortly.