Loading ...
Sorry, an error occurred while loading the content.

Re: [GenesisRadio] GPA10 Low Output

Expand Messages
  • Bruce kf1z
    First thing to do is make sure you are getting 10mW from G59. I trust that you have checked your soundcard output voltage. And tried using the gain by band
    Message 1 of 4 , Jun 27, 2013
    • 0 Attachment
      First thing to do is make sure you are getting 10mW from G59.
       
      I trust that you have checked your soundcard output voltage.
      And tried using the 'gain by band' settings in GSDR?
       
      BRuce
      kf1z
       
       
      From: titZelbop
      Sent: Thursday, June 27, 2013 10:39 AM
      Subject: [GenesisRadio] GPA10 Low Output
       
       

      Hi,

      I am only getting about 5W out (~37dBm) best case on the 160m band. The output level is even less on the higher bands. Is there anything obvious that I should check? I am injecting the signal from an RF signal generator, and going out to some attenuators and then into a spectrum analyzer.

      Regards,

      Stephen

    Your message has been successfully submitted and would be delivered to recipients shortly.