Loading ...
Sorry, an error occurred while loading the content.

Problem with monitor on SSB

Expand Messages
  • Dimitrios Pallis
    The monitor is working on CW mode. but its not working on SSB. im listening a strange sound like a continous whistle. On CW mode i have a little delay (iambic)
    Message 1 of 12 , Dec 8, 2011
    • 0 Attachment
      The monitor is working on CW mode. but its not working on SSB. im listening a strange sound like a continous whistle.

      On CW mode i have a little delay (iambic) its needs to be pressed some msec to transmit

      I have latest firmware installed
    • Bruce KF1Z
      the monitor is for CW. check TX switch time in transmit tab, may be set too long. Soundcard latency and buffer settings also. From: Dimitrios Pallis Sent:
      Message 2 of 12 , Dec 8, 2011
      • 0 Attachment
        the monitor is for CW.
         
         
         
        check TX switch time in transmit tab, may be set too long.
         
        Soundcard latency and buffer settings also.
         
         
        Sent: Thursday, December 08, 2011 5:10 AM
        Subject: [GenesisRadio] Problem with monitor on SSB
         
         

        The monitor is working on CW mode. but its not working on SSB. im listening a strange sound like a continous whistle.

        On CW mode i have a little delay (iambic) its needs to be pressed some msec to transmit

        I have latest firmware installed





        =======
        Email scanned by PC Tools - No viruses or spyware found.
        (Email Guard: 7.0.0.27, Virus/Spyware Database: 6.18860)
        http://www.pctools.com
        =======





        =======
        Email scanned by PC Tools - No viruses or spyware found.
        (Email Guard: 7.0.0.27, Virus/Spyware Database: 6.18860)
        http://www.pctools.com
        =======
      • Dimitrios Pallis
        can i have monitor on ssb? 73 de SV1JGW Dimitrios Jimmy Pallis http://sw1jgw.50webs.com/ To: GenesisRadio@yahoogroups.com From: kf1z@hughes.net Date: Thu, 8
        Message 3 of 12 , Dec 8, 2011
        • 0 Attachment
          can i have monitor on ssb?

          73 de SV1JGW

          Dimitrios Jimmy Pallis

          http://sw1jgw.50webs.com/



          To: GenesisRadio@yahoogroups.com
          From: kf1z@...
          Date: Thu, 8 Dec 2011 08:26:34 -0500
          Subject: Re: [GenesisRadio] Problem with monitor on SSB

           

          the monitor is for CW.
           
           
           
          check TX switch time in transmit tab, may be set too long.
           
          Soundcard latency and buffer settings also.
           
           
          Sent: Thursday, December 08, 2011 5:10 AM
          Subject: [GenesisRadio] Problem with monitor on SSB
           
           

          The monitor is working on CW mode. but its not working on SSB. im listening a strange sound like a continous whistle.

          On CW mode i have a little delay (iambic) its needs to be pressed some msec to transmit

          I have latest firmware installed





          =======
          Email scanned by PC Tools - No viruses or spyware found.
          (Email Guard: 7.0.0.27, Virus/Spyware Database: 6.18860)
          http://www.pctools.com
          =======





          =======
          Email scanned by PC Tools - No viruses or spyware found.
          (Email Guard: 7.0.0.27, Virus/Spyware Database: 6.18860)
          http://www.pctools.com
          =======

        • Bruce KF1Z
          not that I am aware of... Of course if you re using FA66 you should be able to monitor audio through that. There is NO provision in GSDR/G59 to monitor your
          Message 4 of 12 , Dec 8, 2011
          • 0 Attachment
            not that I am aware of...
             
            Of course if you're using FA66 you should be able to monitor audio through that.
             
            There is NO provision in GSDR/G59 to monitor your actual transmit signal, in any mode.
             
            You must use a separate receiver for that.
             
             
            Bruce
             
             
            Sent: Thursday, December 08, 2011 10:28 AM
            Subject: RE: [GenesisRadio] Problem with monitor on SSB
             
             

            can i have monitor on ssb?

            73 de SV1JGW

            Dimitrios Jimmy Pallis

            http://sw1jgw.50webs.com/



            To: GenesisRadio@yahoogroups.com
            From: kf1z@...
            Date: Thu, 8 Dec 2011 08:26:34 -0500
            Subject: Re: [GenesisRadio] Problem with monitor on SSB

             
             
            the monitor is for CW.
             
             
             
            check TX switch time in transmit tab, may be set too long.
             
            Soundcard latency and buffer settings also.
             
             
            Sent: Thursday, December 08, 2011 5:10 AM
            Subject: [GenesisRadio] Problem with monitor on SSB
             
             
             
            The monitor is working on CW mode. but its not working on SSB. im listening a strange sound like a continous whistle.

            On CW mode i have a little delay (iambic) its needs to be pressed some msec to transmit

            I have latest firmware installed





            =======
            Email scanned by PC Tools - No viruses or spyware found.
            (Email Guard: 7.0.0.27, Virus/Spyware Database: 6.18860)
            http://www.pctools.com
            =======





            =======
            Email scanned by PC Tools - No viruses or spyware found.
            (Email Guard: 7.0.0.27, Virus/Spyware Database: 6.18860)
            http://www.pctools.com
            =======






            =======
            Email scanned by PC Tools - No viruses or spyware found.
            (Email Guard: 7.0.0.27, Virus/Spyware Database: 6.18860)
            http://www.pctools.com
            =======





            =======
            Email scanned by PC Tools - No viruses or spyware found.
            (Email Guard: 7.0.0.27, Virus/Spyware Database: 6.18860)
            http://www.pctools.com
            =======
          • Sinisa Tasic
            Hello Dimitrios ,   You can control your SSB only visually in GSDR. If you make choice for panscope for main screen you will see your audio ,. You will see
            Message 5 of 12 , Dec 8, 2011
            • 0 Attachment
              Hello Dimitrios ,
               
              You can control your SSB only visually in GSDR. If you make choice for panscope for main screen you will see your audio ,. You will see cliping and compression if you use it. Un-fortunaly you can’t see transmitting signal  how it looks like. You audio processing in PC and sound card can look very good but you can go in the clipping with high audio level in transmitting part G59 and produce  a lot of IMD and splatters all around  especially at audio IF frequency  typical 11.25kHZ and all their harmonics all around FOSC. It can be happens as target is only rough output power.  Please look picture I attached in G59 manual.  to see which frequencies you can expect. When you check audio. GSDR settings once at your setup after that you will have always good transmitting signal  CW/SSB/Digital.
               
              VY 73/72 Tasa YU1LM/QRP
               

              From: Dimitrios Pallis <mc90606@...>
              To: genesisradio@yahoogroups.com
              Sent: Thursday, December 8, 2011 4:28 PM
              Subject: RE: [GenesisRadio] Problem with monitor on SSB

               
              can i have monitor on ssb?

              73 de SV1JGW

              Dimitrios Jimmy Pallis

              http://sw1jgw.50webs.com/


              To: GenesisRadio@yahoogroups.com
              From: kf1z@...
              Date: Thu, 8 Dec 2011 08:26:34 -0500
              Subject: Re: [GenesisRadio] Problem with monitor on SSB

               

              the monitor is for CW.
               
               
               
              check TX switch time in transmit tab, may be set too long.
               
              Soundcard latency and buffer settings also.
               
               
              Sent: Thursday, December 08, 2011 5:10 AM
              Subject: [GenesisRadio] Problem with monitor on SSB
               
               

              The monitor is working on CW mode. but its not working on SSB. im listening a strange sound like a continous whistle.

              On CW mode i have a little delay (iambic) its needs to be pressed some msec to transmit

              I have latest firmware installed





              =======
              Email scanned by PC Tools - No viruses or spyware found.
              (Email Guard: 7.0.0.27, Virus/Spyware Database: 6.18860)
              http://www.pctools.com/?cclick=EmailFooterClean_51
              =======





              =======
              Email scanned by PC Tools - No viruses or spyware found.
              (Email Guard: 7.0.0.27, Virus/Spyware Database: 6.18860)
              http://www.pctools.com
              =======



            Your message has been successfully submitted and would be delivered to recipients shortly.