Loading ...
Sorry, an error occurred while loading the content.

Re: [Geared_hub_bikes] Re: Shifters for Internally Geared Hubs [1 Attachment]

Expand Messages
  • Zack B
    That looks like what I need for three nexus bikes. Keep us posted! ... shifters. Note that these have a cable anchor point that can be either parallel with the
    Message 1 of 12 , Jun 27, 2013
    • 0 Attachment

      That looks like what I need for three nexus bikes. Keep us posted!

      On Jun 26, 2013 9:59 PM, "Jeff Meredith" <jeff@...> wrote:
      >
      >  
      > [Attachment(s) from Jeff Meredith included below]
      >
      > Bruce,
      >  
      > I'm attaching an image with the 3 levers I'm considering for the new shifters. Note that these have a cable anchor point that can be either parallel with the base (as shown) or angled like the ones I'm making now (it's on a tab) and they are lighter since the back is relieved around the clamp.  I'm probably going with the ones on the ends, since the pricing to make the middle one is coming in pretty high.  I'll have to mock up some bar end mounts to see what that looks like, but one of the preferred mounts is clamping it to the bar stem. Then you could flip the bike up and not hit it. Just for a reference point, the O.D. of the whole unit is 2.5."  
      >  
      > Jeff
      >
      >
      > On Wed, Jun 26, 2013 at 3:31 PM, Zack B <zoombomber@...> wrote:
      >>
      >>  
      >>
      >> What are the other shifters you are working on going to look like?
      >>
      >> Would it be possible to mount the hotrod lever on the stem or handlebar so that you could angle it down enough to still flip the bike over for tire changes without damaging the lever?
      >>
      >> On Jun 25, 2013 10:59 PM, "boxkars" <jeff@...> wrote:
      >>>
      >>>  
      >>>
      >>> I have clamps from 7/8" [22.22mm] to 1.375" [34.9mm], so I think we might cover it just from looking at the photo. There's 4 sizes in between, so let me know what the diameter is and I'll check.
      >>>
      >>> Thanks,
      >>>
      >>> Jeff
      >>>
      >>> --- In Geared_hub_bikes@yahoogroups.com, Zack B <zoombomber@...> wrote:
      >>> >
      >>> > Awesome product!
      >>> >
      >>> > Do you have a frame clamp that will work on oversize tubing?
      >>> >
      >>> > Like this:
      >>> >
      >>> > http://www.flickr.com/photos/luban/6944401976/sizes/o/
      >>> >
      >>> >
      >>> > On Tue, Jun 25, 2013 at 11:02 AM, boxkars <jeff@...> wrote:
      >>> >
      >>> > > **
      >>> > >
      >>> > >
      >>> > > I build shifters for these hubs that work with the current models from
      >>> > > Shimano (3,7,8,&11 speed) and Sturmey Archer (3,5,&8 speed)and I'm
      >>> > > developing one for the SRAM range as well. Right now I have shifters for
      >>> > > cruiser bikes, but I'm developing city/commuter and MTB versions. The
      >>> > > current range is at www.hotrodbicycles.com The unique aspect of our
      >>> > > shifters is that you get an index plate that has up to 4 different shift
      >>> > > patterns, so you can upgrade from a 3 speed to an 8 speed for instance
      >>> > > without having to buy anything else, and you can change out the index plate
      >>> > > if you want to change brands (Shimano to SA for example), without having to
      >>> > > buy a new shifter. They are also built to last as long as the whole bike.
      >>> > > I'm hoping I can help answer questions about these hubs and what it takes
      >>> > > to shift them and that I can get some feedback and suggestions on my
      >>> > > product line.
      >>> > >
      >>> > > Jeff Meredith
      >>> > > BOXKARS
      >>> > >
      >>> > >
      >>> > >
      >>> >
      >>> >
      >>> >
      >>> > --
      >>> > -Zack
      >>> >
      >>>
      >
      >

    • Jeff Meredith
      We will be working on a shifter for NuVinci hubs . The question is whether to come up with a spring loaded take up for the other cable or make a spool that
      Message 2 of 12 , Jun 29, 2013
      • 0 Attachment
        We will be working on a shifter for NuVinci hubs . The question is whether to come up with a spring loaded take up for the other cable or make a spool that winds & unwinds the 2 cables they have now. As soon as I finish the SRAM and commuter versions of the IGH shifters, I'm definitely going to look at the Nuvinci. I don't think their cutesy plastic shifter fits very well with a brooks saddle. And, like most stock shifters, I think the hub will outlast it.   


        On Thu, Jun 27, 2013 at 6:31 AM, jensm68 <jens.magne.andreassen@...> wrote:
         

        Do you have anything for the NuVinci 360 in the pipeline ?

        Looking forward to following your developments.


      • pj
        ... Still manufactured and available from Sturmey for the AW family of three speed hubs.
        Message 3 of 12 , Jun 30, 2013
        • 0 Attachment
          > They remind me of the "stick shift" on my childhood,
          > banana seated, bike from about 1970.

          Still manufactured and available from Sturmey for the AW family of three speed hubs.

          <http://classic-cycle.de/out/pictures/1/596_cls3m_p1.jpg>
        Your message has been successfully submitted and would be delivered to recipients shortly.