Loading ...
Sorry, an error occurred while loading the content.

Re: [Geared_hub_bikes] SA 3 speed shifter clamp threads

Expand Messages
  • Steven Johnson
    Aaron,   Thanks, I should know better. Reminds me of all of the Huret front derailleur clamp bolts I used to strip back in the 70s.   Steve
    Message 1 of 2 , Feb 20, 2012
    • 0 Attachment
      Aaron,
       
      Thanks, I should know better. Reminds me of all of the Huret front derailleur clamp bolts I used to strip back in the 70s.
       
      Steve

      From: Aaron Goss <aaron@...>
      To: Geared_hub_bikes@yahoogroups.com
      Sent: Sunday, February 19, 2012 4:31 PM
      Subject: [Geared_hub_bikes] SA 3 speed shifter clamp threads

       
      the bolt is too short and only engages a few threads.
      Use a longer M5 bolt and it should work fine.  Even if the threads are stripped.
      If not, it easy to Heli-coil the threads.

      --
      Sincerely,
      Aaron Goss 
      President & Master Mechanic

      Aaron's Bicycle Repair, Inc.
      6527 California Avenue SW
      Seattle, WA   98136

      (206) 938-9795 

      RideYourBike.com



    Your message has been successfully submitted and would be delivered to recipients shortly.