Loading ...
Sorry, an error occurred while loading the content.

Re: SRAM 5 speed and SA ASC

Expand Messages
  • NatalieL
    Message 1 of 22 , Oct 28, 2009
    • 0 Attachment
      --- In Geared_hub_bikes@yahoogroups.com, "NatalieL" <johnlyons53@...> wrote:
      >An update on the hub. I was very surprised when going through my collection of bits and pieces of SA stuff last night to find a standard cable connector for the hub so it can be hooked up without the SA quick release. This isn't the usual indicator spindle but is a two piece arrangement that I've only seen on this hub. The ASC will then be shipped to the high bidder with a trigger, a NOS cable and pulley set, and, of course, the hub. On the bench it works fine - high gear is direct drive, 2nd is 90%, and low gear is 75%
      >
      >
      > --- In Geared_hub_bikes@yahoogroups.com, Mike Wilson <mwilson@> wrote:
      > >I do and can throw it and a cable assembly into the deal. I don't have the quick release half for the shift cable so you would need that or I may have what's needed to convert the hub over to a standard SA connector. I'll look tonight.
      > > I could be interested in the ASC; do you have a shift lever?
      > >
      > > Michael Wilson
      > >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.