Loading ...
Sorry, an error occurred while loading the content.
 

Shimano? 7spd parts

Expand Messages
  • bianchigirll
    Hello Everyone. let me start by saying I have not seen this bike. I know I know it belongs to some one at work. he told me it was a shimano 7spd but looking
    Message 1 of 5 , Sep 2, 2009
      Hello Everyone.

      let me start by saying I have not seen this bike. I know I know it belongs to some one at work. he told me it was a shimano 7spd but looking over this shimano product site I found I do not se what he is talking aboot.

      the bike is a Cannondale 50/50 he bought used (I think from overseas). when he assembled it apparently the 'operating rod' (like on a three speed) that goes in the axle is bent and will not work.

      does anyone know about this or have shimano instructions I can look at? parts source?

      Trina Celeste
    • pdxrandonneur
      ... The shimano 7 speed does not have a rod that goes into the hub, as far as I know the only shimano gear hubs that do are the 3 speeds. According to
      Message 2 of 5 , Sep 2, 2009
        --- In Geared_hub_bikes@yahoogroups.com, "bianchigirll" <bianchigirll@...> wrote:
        >
        >
        > Hello Everyone.
        >
        > let me start by saying I have not seen this bike. I know I know it belongs to some one at work. he told me it was a shimano 7spd but looking over this shimano product site I found I do not se what he is talking aboot.
        >
        > the bike is a Cannondale 50/50 he bought used (I think from overseas). when he assembled it apparently the 'operating rod' (like on a three speed) that goes in the axle is bent and will not work.
        >
        > does anyone know about this or have shimano instructions I can look at? parts source?

        The shimano 7 speed does not have a rod that goes into the hub, as far as I know the only shimano gear hubs that do are the 3 speeds. According to bikepedia the 50/50 came with the nexus 8 speed, which does not have a push rod either. Here is the spec sheet for the 7 speed anyway:

        http://bike.shimano.com/publish/content/global_cycle/en/us/index/tech_support/tech_tips.download.-Par50lparsys-0022-downloadFile.html/16)%20Inter%207%20ohaul.pdf

        -Rando
      • Trina Brady
          thanks Rando.   I ll have to try and see the bike.   the instructions look just like my Nexus8 I just got.    Trina ... From: pdxrandonneur
        Message 3 of 5 , Sep 2, 2009
           
          thanks Rando.   I'll have to try and see the bike.   the instructions look just like my Nexus8 I just got. 
           
          Trina


          --- On Wed, 9/2/09, pdxrandonneur <pdxrandonneur@...> wrote:

          From: pdxrandonneur <pdxrandonneur@...>
          Subject: [Geared_hub_bikes] Re: Shimano? 7spd parts
          To: Geared_hub_bikes@yahoogroups.com
          Date: Wednesday, September 2, 2009, 11:05 PM

           
          --- In Geared_hub_bikes@ yahoogroups. com, "bianchigirll" <bianchigirll@ ...> wrote:
          >
          >
          > Hello Everyone.
          >
          > let me start by saying I have not seen this bike. I know I know it belongs to some one at work. he told me it was a shimano 7spd but looking over this shimano product site I found I do not se what he is talking aboot.
          >
          > the bike is a Cannondale 50/50 he bought used (I think from overseas). when he assembled it apparently the 'operating rod' (like on a three speed) that goes in the axle is bent and will not work.
          >
          > does anyone know about this or have shimano instructions I can look at? parts source?

          The shimano 7 speed does not have a rod that goes into the hub, as far as I know the only shimano gear hubs that do are the 3 speeds. According to bikepedia the 50/50 came with the nexus 8 speed, which does not have a push rod either. Here is the spec sheet for the 7 speed anyway:

          http://bike. shimano.com/ publish/content/ global_cycle/ en/us/index/ tech_support/ tech_tips. download. -Par50lparsys- 0022-downloadFil e.html/16)%20Inter%207% 20ohaul.pdf

          -Rando


        • astronut1001
          Here is the below link as a tiny URL, unbroken by our Yahoo friends. http://tinyurl.com/mmdv3w Rich Wood
          Message 4 of 5 , Sep 2, 2009
            Here is the below link as a tiny URL, unbroken by our Yahoo friends.

            http://tinyurl.com/mmdv3w

            Rich Wood



            --- In Geared_hub_bikes@yahoogroups.com, "pdxrandonneur" <pdxrandonneur@...> wrote:
            >
            > --- In Geared_hub_bikes@yahoogroups.com, "bianchigirll" <bianchigirll@> wrote:
            > >
            > >
            > > Hello Everyone.
            > >
            > > let me start by saying I have not seen this bike. I know I know it belongs to some one at work. he told me it was a shimano 7spd but looking over this shimano product site I found I do not se what he is talking aboot.
            > >
            > > the bike is a Cannondale 50/50 he bought used (I think from overseas). when he assembled it apparently the 'operating rod' (like on a three speed) that goes in the axle is bent and will not work.
            > >
            > > does anyone know about this or have shimano instructions I can look at? parts source?
            >
            > The shimano 7 speed does not have a rod that goes into the hub, as far as I know the only shimano gear hubs that do are the 3 speeds. According to bikepedia the 50/50 came with the nexus 8 speed, which does not have a push rod either. Here is the spec sheet for the 7 speed anyway:
            >
            > http://bike.shimano.com/publish/content/global_cycle/en/us/index/tech_support/tech_tips.download.-Par50lparsys-0022-downloadFile.html/16)%20Inter%207%20ohaul.pdf
            >
            > -Rando
            >
          • astronut1001
            Trina; If it is a 7 or 8 speed Shimano hub then most likely the damaged part is likely to be the Casette Joint . This is the mechanism that the shift cable
            Message 5 of 5 , Sep 2, 2009
              Trina;

              If it is a 7 or 8 speed Shimano hub then most likely the damaged part is likely to be the "Casette Joint". This is the mechanism that the shift cable attaches to and is readily removable from the hub and replaceable as long as it is the only thing wrong. Depending on source bought at it should be in the under $20 range.

              If it is just the forward facing arm part of the casette joint that the cable housing seats in that is bent it might even be able to be unbent.

              Rich Wood


              --- In Geared_hub_bikes@yahoogroups.com, Trina Brady <bianchigirll@...> wrote:
              >
              >  
              > thanks Rando.   I'll have to try and see the bike.   the instructions look just like my Nexus8 I just got. 
              >  
              > Trina
              >
              >
              > --- On Wed, 9/2/09, pdxrandonneur <pdxrandonneur@...> wrote:
              >
              >
              > From: pdxrandonneur <pdxrandonneur@...>
              > Subject: [Geared_hub_bikes] Re: Shimano? 7spd parts
              > To: Geared_hub_bikes@yahoogroups.com
              > Date: Wednesday, September 2, 2009, 11:05 PM
              >
              >
              >  
              >
              >
              >
              > --- In Geared_hub_bikes@ yahoogroups. com, "bianchigirll" <bianchigirll@ ....> wrote:
              > >
              > >
              > > Hello Everyone.
              > >
              > > let me start by saying I have not seen this bike. I know I know it belongs to some one at work. he told me it was a shimano 7spd but looking over this shimano product site I found I do not se what he is talking aboot.
              > >
              > > the bike is a Cannondale 50/50 he bought used (I think from overseas). when he assembled it apparently the 'operating rod' (like on a three speed) that goes in the axle is bent and will not work.
              > >
              > > does anyone know about this or have shimano instructions I can look at? parts source?
              >
              > The shimano 7 speed does not have a rod that goes into the hub, as far as I know the only shimano gear hubs that do are the 3 speeds. According to bikepedia the 50/50 came with the nexus 8 speed, which does not have a push rod either. Here is the spec sheet for the 7 speed anyway:
              >
              > http://bike. shimano.com/ publish/content/ global_cycle/ en/us/index/ tech_support/ tech_tips. download. -Par50lparsys- 0022-downloadFil e.html/16)%20Inter%207% 20ohaul.pdf
              >
              > -Rando
              >
            Your message has been successfully submitted and would be delivered to recipients shortly.