Loading ...
Sorry, an error occurred while loading the content.

Re: Pletscher Double Leg Kickstand

Expand Messages
  • sinutt02
    Thanks Rich. Yes, I planned on having to trim the legs like I have had to do with the single leg Greenfields that I usually use. A Dremel tool with a cut off
    Message 1 of 3 , Jul 31, 2009
    • 0 Attachment
      Thanks Rich. Yes, I planned on having to trim the legs like I have had to do with the single leg Greenfields that I usually use. A Dremel tool with a cut off wheel makes quick work of it.

      Rob

      --- In Geared_hub_bikes@yahoogroups.com, "Rich Wood" <astronut1001@...> wrote:
      >
      > I do like mine. Works well and is stable as long as the load is equally distributed side to side. It does require that the legs be trimmed to length as part of the installation unless you want the front wheel way off the ground when using it. I have it on the Steelwool Tweed frame which had minimal clearance from the BB to the chainstay bridge so I had to do some minor filing on the stand to get it to fit OK. Should fit w/o modification on most frames that accept a normal behind bottom bracket mounted side stand.
      >
      > Rich Wood
      >
      >
      > --- In Geared_hub_bikes@yahoogroups.com, "sinutt02" <sinutt02@> wrote:
      > >
      > > I am thinking about getting one for my Cannondale that I commute on. The tank weighs about 45 lbs when loaded, and normal single leg kickstands don't give it enough stability. Does anyone have any experience with them? I seem to recall that someone on here commented on one before, but I can't find the thread when I search.
      > > Also they are pretty steep at around $40, so if someone has one they would like to sell, please let me know.
      > >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.