Re: FT 897D Electronic keyer
I've had similar problems when RF gets into to keying line. Also, check for shorts in your paddle's 1/8" connector.
You probably already know this, but check Menu No-025 and set it (NORMAL or REVERSE) so that the dits are on the paddle side that you want, normally the left paddle. Also, it is normal to send a string of dit-dahs when holding BOTH paddles together. With practice you can use this as a shortcut to send even faster. For instance, a "period" can be sent with a single squeeze. This feature is also why I'm suspicious that you may have a short in the connector. I've had problems with shorts when using adapters to go from one size to another.
Steve - AA5TB
--- In FT897@yahoogroups.com, "paul.simmonds49@..." <paul.simmonds49@...> wrote:
> Hi Guys, Anyone had this problem - set my 897D up to use with my Bencher BY2 keyer using the internal keyer for cw training as per the guide in the manual, worked great for a few operations then the code sounded wrong, when I press the left dit paddle I get dit dah and the reverse on the right paddle, holding a paddle generates a stream of dit dah's.
> I have checked the Wiring from the jack plug to the keyer and it meters out ok, also checked all the settings on the radio which is about 1 month old, next step is to reboot if I can't find the problem.
> Best Regards to all