Loading ...
Sorry, an error occurred while loading the content.

Messages List

45089

Re:

Hello Neal, The MD-100 wasn't made for the 897D, but it will work with the 897D. Because it wasn't made for the 897D, make sure the filter switch on the bottom
Hank Lambert
May 24
#45089
 
45088

Re:

Yes leave settings as they were for the Yaseu hand mic. And put the MD 100A8X in the through position. Adjust your settings from there. I did that and am
Ka8mnp
May 17
#45088
 
45087

(no subject)

Everyone,I just purchased the Yaesu  Desktop  Microphone MD100A8X, should be here in a few days. Any tips available for the best way to set-up this
Neal Klimek
May 17
#45087
 
45086

Re: Problem with USB &LSB on 6 metres

If the problem occures only during receiving, maybe the AGC is turned off by accident. 73 Haris SV1GRB
Haris - sv1grb
May 12
#45086
 
45085

Re: Problem with USB &LSB on 6 metres

It sounds as if the ALC is cutting back the RF on peaks with high VSWR. I had a complaint of broken / distorted speech. Retuned the antenna tuner onto
Denis Dawson
May 12
#45085
 
45084

Re: dechiphering the FT-897 meter

Thank you both for ideas. On further test it looks like RF is getting back into the rig despite no swr. Had not thought about the A idling current. Will follow
Dermot Flanagan
May 12
#45084
 
45083

Re: Problem with USB &LSB on 6 metres

sounds odd, but this radio will do that quickly if the antenna isnt right. I had complaints about my audio when I had an antenna issue, the external tuner
Chris Robinson
May 11
#45083
 
45082

Re: Problem with USB &LSB on 6 metres

Check the PA idling current.  My 857 had similar issue.  Checked idling current and was WAY off spec.  Re-tuned and works fine ever since.  VERY easy self
D F
May 11
#45082
 
45081

dechiphering the FT-897 meter

Can anyone explain to me how units/tick for the SWR, ALC, MOD and PWR meter on the FT-897. The manual is unhelpful and I haven't figured out a way to decode
wchulley
May 11
#45081
 
45080

Problem with USB &LSB on 6 metres

Hi, my rig has developed a problem on 6m as follows, very distorted audio on usb and lsb only a sound like phasing changes!Rig is working fine on all other
Dermot Flanagan
May 11
#45080
 
45079

Re: 857

I had this done to my radio as well. I looked at it and I think my serial number is buried and I am not going to disassemble it. (Have power supply option)
Michael Miller
May 5
#45079
 
45078

Re: 857

I assume you are trying to assess the age. Here are the first 3 digits of the serial number 7M8 73 Bill K4NAE
Bill Knab
May 5
#45078
 
45077

Re: 857

I assume you are trying to assess the age. Here are the first 3 digits of the serial number 7M8 73 Bill K4NAE On Thu, May 4, 2017 at 5:25 PM, 'f5pbg@...'
Bill Knab
May 4
#45077
 
45076

Re: 857

What is your serial number ? Thank's 73's de Ludovic - F5PBG. ... What is your serial number ? Thank's 73's de Ludovic - F5PBG. Le 23/04/2017 à 18:16, Bill
f5pbg@...
May 4
#45076
 
45068

RESOLVED---MH-59 microphone Up and Down keys

Good night,  My problem with the keys UP AND DWN The ptt MH-059 has been resolved, the menu 026 (cw.paddle) was selected MICKEY, only changed for ELEKEY keys
Cássio Giacon
May 2
#45068
 
View First Topic Go to View Last Topic