Re: Advice on Petticoat/CanCan Skirt Constructions
- Also, when you stitch the gathered netting to the tube, first, work
from the bottom up. Second, lay the netting so the bottom edge
points toward the waist. Stitch it to the tube, then let the netting
fall over the stitching to lay the correct way. This both hides the
stitching and the raw edges (less snags), and gives more fullness and
springiness because you have essentially doubled the depth of the
gathering at the attachment point.
Hope this helps!
At 06:26 AM 2/14/2013, you wrote:
>On 2/14/2013 3:19 AM, darth_eagle wrote:
> > I saw this Petticoat Skirt on someone FB Page and I wonder if anyone
> > can offer any advice on making it?
> > - Based on the above image, should I make the Spandex portion of it as
> > a "Tube", loosely based on the total circumference of my Hips so it'll
> > be snuggle around my Hips? (Am a Plus Size person FYI)
>That's not regular spandex... that's power net, or the modern
>equivalent. And look at the waist area. That may be a regular elastic
>(very wide kind, trimmed and zigged at the bottom edge (which isn't a
> > - What shape should I cut for the "Bottom Half" of the skirt (CircleInternational Costumers' Guild Archivist
> > OR Long Rectangular Strip?) and how wide it should for the "top
> > portion", compared to the length of the bottom hem of the Spandex?
>Strip. It's not an exact rectangle because it's longer in back than
>front. Where you connect the two, make sure to use a very stretchy
>stitch. You may need to put bias tape or binding around that seam so it
> > - Which Type of Netting is best to be used for the bottom half of the
> > skirt?
>Illusion. It's the the stiff bridal vale stuff.
> > - How many layers should I make the bottom most netting layer to get a
> > "puffiness" as seen in the photo
>I think it's just folded in half... the gather stitch is in the
>center.... and it's folder over. Thing to note... There's a thick row
>of tape under at the seam. It doesn't look like there's cording there,
>but it's a fairly solid bias tape.
"Those Who Fail to Learn History
Are Doomed to Repeat It;
Those Who Fail To Learn History Correctly -
Why They Are Simply Doomed."
"The Illusion of Historical Fact"
-- C. Y. 4971
[Non-text portions of this message have been removed]
- Cat Devereaux <CatDevereaux@...> wrote:
> If you start w/ a shaper, then you could just use spandex, notYa, I will be wearing the usual Waist Cincher and maybe Shaper Trousers (haven't get round to get one yet as last time I bought it, it got torn the first time I wore it thanks to a clip in my nail! @_@ Then again, it was one of those "slightly thicker" than Pantyhose kind) underneath the Petticoat Skirt so dun need addition "support" from the Petticoat Skirt. -_^
> fitted quite as tight for the upper skirt area.
And there will still be a slight allowance around the Tummy & Thigh portions of the actual dress apart from it's Lined, so any "patterning" dun show through too much.
So guess normal Spandex/Lycra will do for the top portion? I might indulge a bit and get better quality Polyester Lycra from Spotlight for it, rather than the cheaper "overly stretchy" Spandex from regular cloth shops.
> Strip. It's not an exact rectangle because it's longer in back thanOkay, I'm very "naive" over sewing elastic cloths :
> front. Where you connect the two, make sure to use a very stretchy
> stitch. You may need to put bias tape or binding around that seam
> so it doesn't scratch.
Just regular Zigzag Stitches with normal polyester thread will do right?
Do I need to try to stretch the Lycra a bit and align it with the slightly gathered netting too to retain better the elasticity of the Lycra?
> Illusion. It's the the stiff bridal vale stuff.Illusion as Netting or more towards the Organza kind?
> I think it's a 3:1, which is the standard tight gather. Though theTop is the wider portion right that is sew to the Lycra/Spandex?
> top might be a 4:1
Thanks for the advice :)
- Sarah Strong <sarahstrong13@...> wrote:
> The dress pattern would need to be princess seams, possibly withYub yub. ;)
> added gores but preferably just really flared lower skirts.
I'm planning to put Princess Seams into the design (well, actually since I'm busty, all my dress have Princess Seams) after seeing others who had done it "correctly" had it too.
Also will have additional panels added in between the Seams to increase the bottom flare so it'll be close to Full Circle. :P
Something like this tho' the part where it flares out isn't suppose to be that "tight" (ya, I need to do Sketch Version 3.0 to correct the error I made in V2 Sketch)
(Ps : The Tight Sleeves seen sew to the Armhole isn't suppose to be in the original dress design. I have it, made from regular Illusion Cloth, cause I dun like to expose my Upper Arm skin as it's too pockmarked @_@ )
- Silvara <silvaragreenleaf@...> wrote:
> if you could ask on the fabric type she usually shares that info since the how to seems to he tackled already.Am still waiting for a reply to my enquires but guess she might be busy right now with a project to unable to reply in details and it onlu been like 2 days since I last asked. :/
- Pierre & Sandy Pettinger <costumrs@...> wrote:
> Also, when you stitch the gathered netting to the tube, first, workThanks for the advice :)
> from the bottom up. Second, lay the netting so the bottom edge
> points toward the waist. Stitch it to the tube, then let the netting
> fall over the stitching to lay the correct way. This both hides the
> stitching and the raw edges (less snags), and gives more fullness and
> springiness because you have essentially doubled the depth of the
> gathering at the attachment point.
Will do that when I sew it to the Tube top ;)