Loading ...
Sorry, an error occurred while loading the content.

13434Re: [ETXASTRO] Entering seconds for custom object autostar 497

Expand Messages
  • Ron
    Aug 15, 2013
    • 0 Attachment
        Similar if not the same information is in the back of the users manual for the LX200R and LXD75 under optional accessories with the Eyepieces.   It gives Power and Actual Field.  The ETX manual only gives the power.
       
        Not knowing the difference between Actual and apparent and other items about the FOV has reduced my observation enjoyment.
       
        Dr. Clay’s site provides a lot of helpful information and he uses ‘plain’ english.
       
      Ron
       
      Sent: Thursday, August 15, 2013 12:06 PM
      Subject: Re: [ETXASTRO] Entering seconds for custom object autostar 497
       


      Hi,
       
      I got the info from Dr. Clay's website where he lists ETX scopes and FOV for various FL eyepieces (very useful info).  For the ETX 125 and a 26mm eyepiece, his table reads:
      26mm - 73X / (42')

      The site can be found here:
       
      All the Best,
       
      Brian
       
      Brian
       
      Brian Straight, Ph.D.
      The Walnut Ridge Observatory
      40.389452/-87.044881
      West Point, Indiana


      On Thu, Aug 15, 2013 at 12:57 PM, Chris Harvey <chris@...> wrote:
       

      Ahh yea I see .. sorry .. just looking in Stellarium; it looks like the Plaiedes is aprox 5 arc mins square, for context.
      But SEDS says the Plaiedes has: Apparent Dimension: 110.0 (arc min)
      What have I got wrong?





      On 15/08/2013 17:39, Ron wrote:
       
        I am pretty sure he was saying the Field Of View of the 26mm is 40 odd ArcMinutes.
       
        That is how I read it.
       
      Ron
       
      Sent: Thursday, August 15, 2013 10:09 AM
      Subject: Re: [ETXASTRO] Entering seconds for custom object autostar 497
       


      Erm, are you saying a star takes 40mins to get accross the FoV on an ETX125 with 26mm? That canny be right... more like 4mins, if that ?!
      Sorry if I'm misunderstanding you . .. .
      (I have read the Weasner news, will read again properly later to understand further, you don't miss somet 'till its gone ..  . . .. . )

      Nothing to do with ETX, but check out my Perseids including an animation of the smoke from a fireball dying away over 14mins:
      www.flitemedia.com/photography/night-sky.php
      Cheers,
      Chris


      On 15/08/2013 15:56, Brian Straight wrote:
       
      ...and with a 40-odd-minute FOV at 26mm, not necessary...
       
      Brian
       
      Brian Straight, Ph.D.
      The Walnut Ridge Observatory
      40.389452/-87.044881
      West Point, Indiana


      On Thu, Aug 15, 2013 at 10:37 AM, BrianS <briansxx@...> wrote:
       

      OK--I'm sure this is a "dumb" question, but I'll ask it any way. I want to use my 125 to take a look at the new nova in Delphinus. I've created a user object, and I need to enter an RA of 20h:23m,30s, but the seconds only allows for single-digit entry, which seems rather strange. Maybe seconds is more resolution that is needed for the ETX, given the field of view, but any thoughts or help appreciated.

      Thanks and Best,

      Brian

       


       
    • Show all 22 messages in this topic