Loading ...
Sorry, an error occurred while loading the content.

AW: [Doepfer_a100] Dark Time additional Combi Modes

Expand Messages
  • yahoo@doepfer.de
    Karel, I ll send a copy of this email to Christian Assall (software@doepfer.de). He programmed the new firmware and knows details. Please address questions
    Message 1 of 2 , Jan 7, 2013
    • 0 Attachment
      Karel,

      I'll send a copy of this email to Christian Assall (software@...). He
      programmed the new firmware and knows details. Please address questions that
      relate to the Dark Time firmware directly to him.

      Best wishes
      Dieter Doepfer

      > -----Urspr√ľngliche Nachricht-----
      > Von: Doepfer_a100@yahoogroups.com
      > [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von karelvanbezooijen
      > Gesendet: Montag, 31. Dezember 2012 12:23
      > An: Doepfer_a100@yahoogroups.com
      > Betreff: [Doepfer_a100] Dark Time additional Combi Modes
      >
      >
      > Hello,
      >
      > I installed firmware version v1.2 today and noticed this when
      > using the additional Combi Modes:
      >
      > When using Mode 1 (which is the 'standard mode' i.e. lower row is
      > gate length) row 1 is dependent to row 2. I mean step 9 always
      > controlling step 1 and so on.
      >
      > This is different is Mode 2 (lower row is velocity)
      >
      > Example:
      >
      > Row 1 = step 1 to 8
      > Row 2 = step 9
      >
      > In Mode 2 I can control the entire Row 1 with just the knob of
      > step 9 which is great. (esp. when velocity is controlling Cutoff)
      >
      > In Mode 1 this is not possible (any more).
      > In this example step 9 is controlling the gate length of step 1 only.
      >
      > I don't know if this has been programmed this way deliberately of
      > course but personally I would like that Mode 1 is acting the same
      > way as Mode 2.
      > Modes 4 (volume) and 6 (pitch) work the same as Mode 2 BTW.
      >
      >
      > Regards Karel
      >
      > (BTW Dieter, I send you an email concerning the COTK ratchet
      > sequencer some time ago. I found out that the setup can even be
      > more simple as I thought. I use an A-138a mixer to mix the gates
      > now which works great)
      >
      >
      >
      >
      >
      > ------------------------------------
      >
      > Yahoo! Groups Links
      >
      >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.