Loading ...
Sorry, an error occurred while loading the content.

dark time problem?

Expand Messages
  • jgs3774
    hello, newb here, I apologize in advance if this is a stupid question I ve owned a dark energy for a while and recently purchased a dark time. I seem to be
    Message 1 of 7 , Oct 5, 2011
    • 0 Attachment
      hello, newb here, I apologize in advance if this is a stupid question

      I've owned a dark energy for a while and recently purchased a dark time. I seem to be having a problem with the sequencer.

      Out of the box when all steps are set to on/cont. (on the 16 step sequence) the 12th step goes back to 1 and begins again. In other words, its as if the 12th step is set to on/jump. The only way to get the sequencer to go through the sequence 1-16 is to set the 16th and a step before the 12th step to jump, then it runs through.

      Is this normal? I didn't think so and had a replacement sent out and that unit is doing the same thing, so now I'm wondering if I'm missing something.

      Any help would be appreciated!
    • yahoo@doepfer.de
      ... Maybe the switch #12 is defective and has to be replaced. I ask you to address technical questions that refer to Dark Time to our specialist Christian
      Message 2 of 7 , Oct 5, 2011
      • 0 Attachment
        > hello, newb here, I apologize in advance if this is a stupid question
        >
        > I've owned a dark energy for a while and recently purchased a
        > dark time. I seem to be having a problem with the sequencer.
        >
        > Out of the box when all steps are set to on/cont. (on the 16 step
        > sequence) the 12th step goes back to 1 and begins again. In other
        > words, its as if the 12th step is set to on/jump. The only way to
        > get the sequencer to go through the sequence 1-16 is to set the
        > 16th and a step before the 12th step to jump, then it runs through.
        >
        > Is this normal? I didn't think so and had a replacement sent out
        > and that unit is doing the same thing, so now I'm wondering if
        > I'm missing something.
        >
        > Any help would be appreciated!

        Maybe the switch #12 is defective and has to be replaced. I ask you to
        address technical questions that refer to Dark Time to our specialist
        Christian Assall (software (at) doepfer (dot) de). He is the author of the
        Dark Time firmware and knows all details about the unit. Maybe a firmware
        update will solve the problem.

        Best wishes
        Dieter Doepfer
      • jgs3774
        Cool, thanks for the response. And thanks for making such amazing products, I m really loving these otherwise!
        Message 3 of 7 , Oct 5, 2011
        • 0 Attachment
          Cool, thanks for the response. And thanks for making such amazing products, I'm really loving these otherwise!

          --- In Doepfer_a100@yahoogroups.com, <yahoo@...> wrote:
          >
          > > hello, newb here, I apologize in advance if this is a stupid question
          > >
          > > I've owned a dark energy for a while and recently purchased a
          > > dark time. I seem to be having a problem with the sequencer.
          > >
          > > Out of the box when all steps are set to on/cont. (on the 16 step
          > > sequence) the 12th step goes back to 1 and begins again. In other
          > > words, its as if the 12th step is set to on/jump. The only way to
          > > get the sequencer to go through the sequence 1-16 is to set the
          > > 16th and a step before the 12th step to jump, then it runs through.
          > >
          > > Is this normal? I didn't think so and had a replacement sent out
          > > and that unit is doing the same thing, so now I'm wondering if
          > > I'm missing something.
          > >
          > > Any help would be appreciated!
          >
          > Maybe the switch #12 is defective and has to be replaced. I ask you to
          > address technical questions that refer to Dark Time to our specialist
          > Christian Assall (software (at) doepfer (dot) de). He is the author of the
          > Dark Time firmware and knows all details about the unit. Maybe a firmware
          > update will solve the problem.
          >
          > Best wishes
          > Dieter Doepfer
          >
        • yahoo@doepfer.de
          here are the latest news concerning Dark Energy ;-) Dark Energy Wins Nobel Prize in Physics
          Message 4 of 7 , Oct 5, 2011
          • 0 Attachment
            here are the latest news concerning Dark Energy ;-)

            Dark Energy Wins Nobel Prize in Physics
            http://www.popsci.com/science/article/2011-10/dark-energy-discovery-wins-phy
            sics-nobel

            2011 Nobel Prize to Dark Energy!
            http://physics.about.com/b/2011/10/04/2011-nobel-prize-to-dark-energy.htm

            Best wishes
            Dieter Doepfer
          • Ton Akveld
            And rightly so!
            Message 5 of 7 , Oct 5, 2011
            • 0 Attachment
              And rightly so!

              --- In Doepfer_a100@yahoogroups.com, <yahoo@...> wrote:
              >
              > here are the latest news concerning Dark Energy ;-)
              >
              > Dark Energy Wins Nobel Prize in Physics
              > http://www.popsci.com/science/article/2011-10/dark-energy-discovery-wins-phy
              > sics-nobel
              >
              > 2011 Nobel Prize to Dark Energy!
              > http://physics.about.com/b/2011/10/04/2011-nobel-prize-to-dark-energy.htm
              >
              > Best wishes
              > Dieter Doepfer
              >
            • Ian Campbell
              it was only a matter of time! :))   From: Ton Akveld To: Doepfer_a100@yahoogroups.com Sent: Wednesday, 5 October 2011, 14:53 Subject:
              Message 6 of 7 , Oct 5, 2011
              • 0 Attachment
                it was only a matter of time! :))
                 

                From: Ton Akveld <aca@...>
                To: Doepfer_a100@yahoogroups.com
                Sent: Wednesday, 5 October 2011, 14:53
                Subject: [Doepfer_a100] Re: Dark Energy Wins Nobel Prize in Physics ;-)


                 
                And rightly so!

                --- In Doepfer_a100@yahoogroups.com, <yahoo@...> wrote:
                >
                > here are the latest news concerning Dark Energy ;-)
                >
                > Dark Energy Wins Nobel Prize in Physics
                > http://www.popsci.com/science/article/2011-10/dark-energy-discovery-wins-phy
                > sics-nobel
                >
                > 2011 Nobel Prize to Dark Energy!
                > http://physics.about.com/b/2011/10/04/2011-nobel-prize-to-dark-energy.htm
                >
                > Best wishes
                > Dieter Doepfer
                >




                [Non-text portions of this message have been removed]
              • yahoo@doepfer.de
                ... or a DARK matter of DARK Time ;-) Dieter
                Message 7 of 7 , Oct 5, 2011
                • 0 Attachment
                  > it was only a matter of time! :))

                  or a DARK matter of DARK Time ;-)

                  Dieter
                Your message has been successfully submitted and would be delivered to recipients shortly.