Loading ...
Sorry, an error occurred while loading the content.

AW: [Doepfer_a100] diy kit

Expand Messages
  • yahoo@doepfer.de
    ... No problem. The only disadvantage are the missing control LEDs in case that something is wrong (e.g. if a fuse is blown or a supply is defective). I d
    Message 1 of 2 , Apr 30, 2009
    • 0 Attachment
      > can i saw the diy kit 2 in 2 pieces and use the piece without the
      > 3 leds and 3 resistors on the bus board?

      No problem. The only disadvantage are the missing control LEDs in case that
      something is wrong (e.g. if a fuse is blown or a supply is defective). I'd
      recommend to use the right half with the LEDs to have the control LEDs
      available.

      Best wishes
      Dieter Doepfer
    Your message has been successfully submitted and would be delivered to recipients shortly.