Loading ...
Sorry, an error occurred while loading the content.

A112 problem, or not?

Expand Messages
  • erase
    Bought a used A112, I have small problem with the module. it seems that when I gate the recording trigger for a signal and then play back the sample I get the
    Message 1 of 10 , Aug 14, 2006
    • 0 Attachment
      Bought a used A112, I have small problem with the module.

      it seems that when I gate the recording trigger for a signal and then
      play back the sample I get the sample playing back normal for as long
      as I have gated the recording but it seems to be playing back the
      whole memory (S1 or S2) and the remaining playback is just garbled
      sounds. I am not sure if this is the way the A112 works, it seems to
      be a 50/50 for me. This is quite irritating when looping a sample too
      as I get the garbled sound in the loop (of course...)

      Can someone who uses the A112 much just guide me through a simple
      test of sampling a source, playing it back and so forth ? Does anyone
      recognize this error ? I have exchanged the battery in the module
      aswell and it changed the result a bit, from totally garbled sound to
      less garbled. .

      Thanks

      Daniel
    • hardware@doepfer.de
      Daniel, that s normal and has nothing to do with the battery. In play mode always the complete memory is played back. If you do not record the complete memory
      Message 2 of 10 , Aug 14, 2006
      • 0 Attachment
        Daniel,

        that's normal and has nothing to do with the battery. In play mode always
        the complete memory is played back. If you do not record the complete memory
        then there will occur the rest of previous sample behind the position where
        the recording has been stopped. To avoid this I'd recommend to clear the
        complete memory before you record a new sample (i.e. record without a sound
        or level control fully CCW) or to use the complete memory for a new sample.

        Best wishes
        Dieter Doepfer


        > -----Urspr√ľngliche Nachricht-----
        > Von: Doepfer_a100@yahoogroups.com
        > [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von erase
        > Gesendet: Montag, 14. August 2006 15:34
        > An: Doepfer_a100@yahoogroups.com
        > Betreff: [Doepfer_a100] A112 problem, or not?
        >
        >
        > Bought a used A112, I have small problem with the module.
        >
        > it seems that when I gate the recording trigger for a signal and then
        > play back the sample I get the sample playing back normal for as long
        > as I have gated the recording but it seems to be playing back the
        > whole memory (S1 or S2) and the remaining playback is just garbled
        > sounds. I am not sure if this is the way the A112 works, it seems to
        > be a 50/50 for me. This is quite irritating when looping a sample too
        > as I get the garbled sound in the loop (of course...)
        >
        > Can someone who uses the A112 much just guide me through a simple
        > test of sampling a source, playing it back and so forth ? Does anyone
        > recognize this error ? I have exchanged the battery in the module
        > aswell and it changed the result a bit, from totally garbled sound to
        > less garbled. .
        >
        > Thanks
        >
        > Daniel
        >
        >
        >
        > Yahoo! Groups Links
        >
        >
        >
        >
        >
        >
        >
      Your message has been successfully submitted and would be delivered to recipients shortly.