Loading ...
Sorry, an error occurred while loading the content.

Re: [Distillers] Re: Graham condenser or liebeg condenser

Expand Messages
  • henry sangret
    that s why I use straight sections of tubing with taps or couplings to get at each straight section. I have tried numerous tines to use liquid cleaners with
    Message 1 of 18 , Mar 26, 2013
    • 0 Attachment
      that's why I use straight sections of tubing with taps or couplings to get at each straight section. I have tried numerous tines to use liquid cleaners with no success, yes they remove some of the surface contaminates but they don't remove the sulfides and imbedded hydrocarbons.
       
      I have seen laboratory cleaners that are basically many scrub brushes on a cord and are very flexible to get into hard to reach areas.

      From: Tom tomhawk412@...
      To: Distillers@yahoogroups.com
      Sent: Tuesday, March 26, 2013 7:53 AM
      Subject: [Distillers] Re: Graham condenser or liebeg condenser
       
      To All:

      The same build-up that takes place inside a Lieberg Condenser will, I suppose, build up in a traditional copper worm. What's the best method to clean the inside of a worm? I just flush mine with water immediately after use. Sometimes I pour some StarSan solution through it and then flush it with water. Should I be doing something else? There's no way to scrub the inside of a worm with a brush.

      Thanks,

      Tom

      --- In mailto:Distillers%40yahoogroups.com, henry sangret <henrysangret@...> wrote:
      >
      >
      > Just remember all users is that your condensers must be physically cleaned, (with a brush not soaked) quite frequently when using copper because of sulfur and carbon deposits!. An easy design is easy to clean and produces no strange off flavors that are hard to remove when cleaned frequiently.
      >
      >
      > SNIP

    • bluwater2828
      Vegemite ?? No that s different Sent from Yahoo! Mail for iPhone
      Message 2 of 18 , Mar 26, 2013
      • 0 Attachment
        Vegemite ?? No that's different


        Sent from Yahoo! Mail for iPhone


        From: henry sangret <henrysangret@...>;
        To: Distillers@yahoogroups.com <Distillers@yahoogroups.com>;
        Subject: Re: [Distillers] Re: Graham condenser or liebeg condenser
        Sent: Tue, Mar 26, 2013 2:36:54 PM



        I have no way of analyzing them , I do know that it has been discussed on several professional levels, and the hydrocarbons vary with fermentation yeasts and type of worts.

        From: tgfoitwoods <zymurgybob@...>
        To: Distillers@yahoogroups.com
        Sent: Tuesday, March 26, 2013 1:02 AM
        Subject: [Distillers] Re: Graham condenser or liebeg condenser
         
        Henry,

        Any idea as to what kinds of carbon compounds are deposited on the copper? The chemistry of flavors is a big interest of mine.

        Zymurgy Bob, a simple potstiller Making Fine Spirits

        --- In Distillers@yahoogroups.com, henry sangret <henrysangret@...> wrote:
        >
        > Yes you can buy sil-phos brazing solder that does not contain cadmium, its just harder to use because of the higher temps required.  
        >  
        > I use copper because it helps clean the distillate of sulfides and unwanted carbon compounds. Even the larger distilleries that have stainless stills know the benefits of commer on flavor and have removable copper plates in their stills. Yes you must clean copper more frequently but I believe it makes a cleaned distillate. I use a straight through Liebeg design that has an internal baffle that can be disassembled for cleaning with ordinary tube brushes.
        >
        >
        ----snip----


      • bluwater2828
        Try a gun cleaning kit. I use a shotgun cleaning snake. Sent from Yahoo! Mail for iPhone
        Message 3 of 18 , Mar 26, 2013
        • 0 Attachment
          Try a gun cleaning kit. I use a shotgun cleaning snake.


          Sent from Yahoo! Mail for iPhone


          From: henry sangret <henrysangret@...>;
          To: Distillers@yahoogroups.com <Distillers@yahoogroups.com>;
          Subject: Re: [Distillers] Re: Graham condenser or liebeg condenser
          Sent: Tue, Mar 26, 2013 5:00:18 PM



          that's why I use straight sections of tubing with taps or couplings to get at each straight section. I have tried numerous tines to use liquid cleaners with no success, yes they remove some of the surface contaminates but they don't remove the sulfides and imbedded hydrocarbons.
           
          I have seen laboratory cleaners that are basically many scrub brushes on a cord and are very flexible to get into hard to reach areas.

          From: Tom tomhawk412@...
          To: Distillers@yahoogroups.com
          Sent: Tuesday, March 26, 2013 7:53 AM
          Subject: [Distillers] Re: Graham condenser or liebeg condenser
           
          To All:

          The same build-up that takes place inside a Lieberg Condenser will, I suppose, build up in a traditional copper worm. What's the best method to clean the inside of a worm? I just flush mine with water immediately after use. Sometimes I pour some StarSan solution through it and then flush it with water. Should I be doing something else? There's no way to scrub the inside of a worm with a brush.

          Thanks,

          Tom

          --- In mailto:Distillers%40yahoogroups.com, henry sangret <henrysangret@...> wrote:
          >
          >
          > Just remember all users is that your condensers must be physically cleaned, (with a brush not soaked) quite frequently when using copper because of sulfur and carbon deposits!. An easy design is easy to clean and produces no strange off flavors that are hard to remove when cleaned frequiently.
          >
          >
          > SNIP



        Your message has been successfully submitted and would be delivered to recipients shortly.