Loading ...
Sorry, an error occurred while loading the content.
 

Re: magnet exposure

Expand Messages
  • rosnekcaj
    Just try to apply the JB Weld evenly to keep the rotating parts in balance so you don t get unwanted vibration. rosnekcaj
    Message 1 of 4 , Oct 25 4:29 AM
      Just try to apply the JB Weld evenly to keep the rotating parts in balance so you don't get unwanted vibration.

      rosnekcaj

      --- In Distillers@yahoogroups.com, "jamesonbeam1" <jamesonbeam1@...> wrote:
      >
      >
      > Loulenz,
      >
      > I would try and recoat that area with JB weld (if you have it down
      > there), epoxy or a food grade silicone sealant perferably.
      >
      > JB.
      >
      >
      > --- In Distillers@yahoogroups.com, "loulenz2002" <loulenz2002@>
      > wrote:
      > >
      > > I have an old Little Giant magnetic drive pump. It's an older model
      > snd they no longer have replacement parts. I'm in Chile, so it's kinda
      > hard to get a new pump pronto. On the impeller magnet (ferrite, or
      > ceramic magnet compund it's called) has some type of protective sealant
      > that has come off. I use this pump for hot mash runoff and beer wort to
      > chiller transfers. Would this magnet exposure cause any type of off
      > flavors or toxic compounds to enter the beer wort? I've googled and
      > asked around but noone has a direct answer. What do y'all think?
      > >
      > > Lou
      > >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.