Loading ...
Sorry, an error occurred while loading the content.

Re: mashing question?

Expand Messages
  • booger6870
    I am doing a sourmash it is the ujssm,No turboyeast just bakers yeast.I have done my first run thenthis is my sourmash run it is going to take me a few runs
    Message 1 of 4 , Oct 7, 2009
    • 0 Attachment
      I am doing a sourmash it is the ujssm,No turboyeast just bakers yeast.I have done my first run thenthis is my sourmash run it is going to take me a few runs to get enough to do a strip run so any help would be appreciated?

      booger

      --- In Distillers@yahoogroups.com, Jeff Stewart <StewartDBA@...> wrote:
      >
      > Kitchen supply stores sell large sealable containers designed to be sterilized from 10-40 gallons.   I have seen rain barres used for 45-55 gallons for about $40. After 30 gallons turbo yeast will generate sufficient heat to kill itself off before the highest yields are reached unless you chill the batch.  Chillers are easy to make and available at most home brewing supply companies but it does mean you have more equipment to clean and added cost to operate.  In my opinion there is a diminishing return for sizes over 30G but fewer than 100G unless you are only using it to store tail runs and such. 
      >
      > --- On Wed, 10/7/09, booger6870 <david@...> wrote:
      >
      >
      > From: booger6870 <david@...>
      > Subject: [Distillers] mashing question?
      > To: Distillers@yahoogroups.com
      > Date: Wednesday, October 7, 2009, 5:34 AM
      >
      >
      >  
      >
      >
      >
      > Hi all i have a question what would be the best way to move up from the 2 6 agllon fermentors that i am using now to say 30 or40 gallons?
      >
      > I have a 40 gallon food grade drum that i could use.I was thinking of dumping the backset from this run and all of my lee's and such on top of fresh corn and such and trying it that way?Do you think that would work or should i just start all over?
      > booger
      >
    • Geoff
      Hi, Nice to meet a namesake! The Baker
      Message 2 of 4 , Oct 7, 2009
      • 0 Attachment
        Hi,
        Nice to meet a namesake!
        The Baker

        --- In Distillers@yahoogroups.com, Jeff Stewart <StewartDBA@...> wrote:
        >
        > Kitchen supply stores sell large sealable containers designed to be sterilized from 10-40 gallons.   I have seen rain barres used for 45-55 gallons for about $40. After 30 gallons turbo yeast will generate sufficient heat to kill itself off before the highest yields are reached unless you chill the batch.  Chillers are easy to make and available at most home brewing supply companies but it does mean you have more equipment to clean and added cost to operate.  In my opinion there is a diminishing return for sizes over 30G but fewer than 100G unless you are only using it to store tail runs and such. 
        >
        > --- On Wed, 10/7/09, booger6870 <david@...> wrote:
        >
        >
        > From: booger6870 <david@...>
        > Subject: [Distillers] mashing question?
        > To: Distillers@yahoogroups.com
        > Date: Wednesday, October 7, 2009, 5:34 AM
        >
        >
        >  
        >
        >
        >
        > Hi all i have a question what would be the best way to move up from the 2 6 agllon fermentors that i am using now to say 30 or40 gallons?
        >
        > I have a 40 gallon food grade drum that i could use.I was thinking of dumping the backset from this run and all of my lee's and such on top of fresh corn and such and trying it that way?Do you think that would work or should i just start all over?
        > booger
        >
      Your message has been successfully submitted and would be delivered to recipients shortly.