Re: Pump for cross-flow
- Hi, folks,
Good one, Doc, fit a float- controlled on-off switch, readily available.
I guess the only question is whether the presssure from your tank would give sufficient flow.
--- In Distillers@yahoogroups.com, "doctorlawrencebrown" <doctorlawrencebrown@...> wrote:
> Just a thought, if you have two tanks, one above the other using gravity to feed the condenser, you could use the overpowered pump to refill the higher tank only when the level drops to a certain amount.
- Or you can just look around,. Most people have them all over their homes. All you need is a transformer. Like the ones that are used to plug in cordless phones. Or Those Picture frames that have digital pictures. or what ever..Look on the taggs of the pump to see what the Amps are then Find a transformer that suits.. IF you don't have one at home Ebay, Or Radio shack has all you need any size you want..
Wire it up and plug it in.. Of course this is just my 2 cents worth. I sure there is other ways to handle this issue. but this one would only take a few minutes to fix;./ HTH Nameless "I forgot My Name"
From: Rasputin Paracelsus <rasputin@...>
Sent: Sunday, May 10, 2009 10:25:21 AM
Subject: Re: [Distillers] Re: Pump for cross-flow
You can get transformers from 110 to 12V, I saw one just the other day
while I was looking for something else and thought, "interesting, but
don't need that..." :)
Ed Barcik wrote:
> What do you use for power? 12v battery wouldn’t seem to last very long.
Distillers list archives :
FAQ, Howto distil etc. :
http://homedistiller.orgYahoo! Groups Links
<*> To visit your group on the web, go to:
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to: