Loading ...
Sorry, an error occurred while loading the content.

Re: filtering verses stripping run

Expand Messages
  • jrwme
    ... http://www.winequip.com.au/Home+Winemaking+and+Brewing_Filtration.html?PHPSESSID=e05a19d488e07c400d5de0c9f3ff342b ... Never tried Aluminium sulfate as a
    Message 1 of 3 , Jun 3, 2008
      --- In Distillers@yahoogroups.com, "Arsene Lupin" <ragnagna75012@...>
      > --- In Distillers@yahoogroups.com, "jrwme" <jrwme@> wrote:
      > >
      > > Hi all, just to share,
      > >
      > > In the past I have run a stripping run followed by a spirits run.
      > > This, while slow, produced a quite neutral spirit, only requiring a
      > > little carbon filter when I wanted a top tasting Vodka.
      > >
      > > A couple of weeks ago I picked up a 6 plate wine filtering system
      > > (like this one
      > >
      > > )for a song.
      > >
      > > I now run my wash through the 0.2 micron filter and go straight to the
      > > spirit run. The output of the filtering is clear like water, unless I
      > > have molasses in the wash, then I get a filtrate like tea. I am
      > > finding that I get a very neutral spirit that requires no carbon
      > > filtering. Overall, my runs now take less time (no striping run and no
      > > carbon)although the filtering take around 3 hours for a 50L wash
      > >
      > >
      > > Just my 2 cents, Regards
      > >
      > > Jerry
      > >
      > That's very interesting, how did you setup the filters ? How do you
      > make sure they dont get clogged ? Has anyone tried Aluminium sulfate
      > as a clearing agent ?

      Never tried Aluminium sulfate as a clearing agent

      As for the setup, just run the output of the fermenter through the
      filter and into the boiler. As for clogging, yes they do clog after
      running 50L through them but thats ok as thats what my standard amount
      is. I then disassemble the filter and let the pads dry in the sun for
      a day then shake off the old yeast which I collect and reuse and then
      reuse the filter pads.

    Your message has been successfully submitted and would be delivered to recipients shortly.