Re: copper water heater
- --- In Distillers@yahoogroups.com, justin webster <mail@...> wrote:
>..............WRONG!!! If there is Lead ANYWHERE in the processing in
> thanks Harry,
> but would I be right in thinking there is no danger as long as the
> still head and condenser are all lead free?
contact with any wort, wash or feedstock, you WILL have contamination.
I refer you again to the definition of LEACHING.
> is it a concern that lead may become concentrated in my dunder thru...............YES. See above.
> repeated backsetting?
- Hey Justin,
Did you ever get around to doing anything with that hot water copper tank of yours?
I'm thinking about a similar project.
--- In Distillers@yahoogroups.com, justin webster <mail@...> wrote:
> thanks guys,
> sounds like it's worth a shot and a bit of fun too.
> I already have the gear to cut it open, strip it back and re-solder
> so it's probably do-able.
> I'll let you know what I find (when I get round to it).
> On 2/05/2008, at 10:01 PM, jamesonbeam1 wrote:
> > Good Point Billy,
> > But try almost 50 years old (this is 2008 right? :):).
> > Vino es Veritas,
> > Jim.
> > --- In Distillers@yahoogroups.com, "billy.turf" <billy.turf@>
> > wrote:
> > >
> > > I wonder, If lead is sooo good a leaching, then wouldn't it already
> > > be pretty much all gone out of a 30yr old water heater? Everything
> > > you would add would be without lead of course, but just how much
> > > solder would be used in such an old heater? The amount of
> > leaching is
> > > going to be proportional to the amount of time that it sits in there
> > > too... that's not gonna be a long time.
> > ____snip____