Loading ...
Sorry, an error occurred while loading the content.

Re: Making whisky

Expand Messages
  • toddk63
    Its the SR (Single Reducer) design. Yes 2 column 2 column would be perfect with your 3600W element so long as you have a variac or other temp controller.
    Message 1 of 28 , Mar 4, 2008
    • 0 Attachment
      Its the SR (Single Reducer) design. Yes 2" column

      2" column would be perfect with your 3600W element so long as you have
      a variac or other temp controller. It may be a bit much without the
      temp controller.

      Todd K.


      --- In Distillers@yahoogroups.com, "gff_stwrt" <gff_stwrt@...> wrote:
      >
      >
      > Hi, Todd and Peter, hi folks,
      >
      > Todd, can you tell me, is your Bokakob still the slant plate one
      > or another of his designs?
      >
      > And have you used a two-inch column?
      >
      > I am thinking of making the slant plate one some day, after I
      > get better at operating my pot still.
      >
      > And I am thinking of using a small (maybe ten imperial gallons,
      > which I think is fortyseven litres) hot-water system boiler for my
      > pot still, instead of the liquid propane gas one I use now. Perhaps
      > the two-inch column I use now is not big enough for the 3,6oo watt
      > element.
      >
      > If so I will either have to use a bigger-diameter column, or
      > replace the element with a lower-rated one.
      >
      > What do you more experienced distillers think?
      >
      >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.