Re: Welding SS Flange to SS Mixing Bowl
- What about welding a SS Flange to a SS Mixing Bowl idea. Is that possible?
--- In Distillers@yahoogroups.com, "diskmaster23" <diskmaster23@...>
> A few months ago my welds for my bolts came loose (welds were actually
> silver soldered). After trying to re-weld some SS bolts and having it
> break. I decided to build a whole new boiler with correct SS couplings
> (and actually have them welded in the right place on the KEG, at the
> bottom!!!) and SS flanges..etc. I previously had a SS round plate that
> was about 12" (inches)and I bolted it down that connected to my
> apparatus. However the welds didn't hold and I was thinking about
> doing this SS mixing bowl idea.
> Have any of you guys had any luck welding a SS Flange to a SS Mixing
> Bowl without much warping?
> What other tips or guidance would you guys recommend to make sure this
> boiler is hopefully the last one to come for a longggg time.
> Much thanks!