Loading ...
Sorry, an error occurred while loading the content.

need plans for reflux still

Expand Messages
  • njadpco
    i am wanting to build a low cost reflux still and i have been told that the plans i have are not that good. i am using a propane turkey burner and a 7gal ss
    Message 1 of 2 , Mar 2, 2007
    • 0 Attachment
      i am wanting to build a low cost reflux still and i have been told
      that the plans i have are not that good. i am using a propane turkey
      burner and a 7gal ss keg, with a ss pressure cooker welded on top of
      keg then i was going to cut the lid of the pressure cooker and silver
      solder the copper to that. but i just want a simple reflux still not
      valved and need to know what size pipe to use and etc. a diagram would
      be nice. thanks
    • Robert N
      Try our sister forum http://groups.yahoo.com/group/new_distillers/ you will find everything you need there. Also look at Tony s site http://homedistiller.org
      Message 2 of 2 , Mar 3, 2007
      • 0 Attachment

        Try our sister forum http://groups.yahoo.com/group/new_distillers/ you will find everything you need there. Also look at Tony’s site http://homedistiller.org and Harry’s site http://distillers.tastylime.net/library/ please learn some theory behind what you want to do before you go out and build the still. In that way success is more of a certainty and mistakes less costly.

         

        Yours in Spirit

         

        Robert


        From: Distillers@yahoogroups.com [mailto:Distillers@yahoogroups.com] On Behalf Of njadpco
        Sent: Saturday, March 03, 2007 11:23 AM
        To: Distillers@yahoogroups.com
        Subject: [Distillers] need plans for reflux still

         

        i am wanting to build a low cost reflux still and i have been told
        that the plans i have are not that good. i am using a propane turkey
        burner and a 7gal ss keg, with a ss pressure cooker welded on top of
        keg then i was going to cut the lid of the pressure cooker and silver
        solder the copper to that. but i just want a simple reflux still not
        valved and need to know what size pipe to use and etc. a diagram would
        be nice. t

      Your message has been successfully submitted and would be delivered to recipients shortly.