Loading ...
Sorry, an error occurred while loading the content.

Re: XMAS Present 2006

Expand Messages
  • duds2u
    I used a 50mm brass female solder connection. You will be able to get it at a plumbers supplier. cheers Mal T. ... but how do ... find a ... but I can t ...
    Message 1 of 12 , Dec 27, 2006
    • 0 Attachment
      I used a 50mm brass female solder connection. You will be able to
      get it at a plumbers supplier.
      cheers
      Mal T.

      --- In Distillers@yahoogroups.com, "Carter Cathey"
      <cartercathey@...> wrote:
      >
      > I understand how the sink drain is connected to the bowl or lid,
      but how do
      > you connect the drain to your column. I have not been able to
      find a
      > fitting to thread onto the drain. I like this simple solution,
      but I can't
      > figure out a simple way to connect my column to the drain.
      >
      >
      >
      > --Carter
      >
      >
      >
      > _____
      >
      > From: Distillers@yahoogroups.com
      [mailto:Distillers@yahoogroups.com] On
      > Behalf Of Ian Kent
      > Sent: Thursday, December 21, 2006 1:00 PM
      > To: Distillers@yahoogroups.com
      > Subject: Re: [Distillers] Re: XMAS Present 2006
      >
      >
      >
      > Thanks Mal,
      >
      > That's a great idea.
      >
      > If your unit works as well as it looks then you'll be set.
      >
      > Ian...
      >
      > On 12/21/06, duds2u <taylormc@bigpond. <mailto:taylormc%
      40bigpond.net.au>
      > net.au> wrote:
      > >
      > >
      > >
      > >
      > > Ian,
      > > I have added two photos to the Duds photo file that should help.
      > >
      > > I used a 50mm chrome plated sink waste connection. I wanted to
      use
      > > stainless but couldn't find one locally. Plenty of the chrome
      plated
      > > one in the hardware shops and I figured chrome was pretty inert,
      at
      > > least better than the brass.
      > > I just increased the size of the hole till it was a close fit and
      > > then packed around the thread on the boiler side with teflon tape
      > > and tightened the nut. It has never leaked.
      > > Cheers
      > > Mal T.
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.