Loading ...
Sorry, an error occurred while loading the content.
 

RE: [Distillers] tonys coffee pot still

Expand Messages
  • Pete Sayers
    You could try pushing a small bit of rolled up s/s wool, up into the condensor, about where the cooling jacket is. This will help transfer the cold to the air
    Message 1 of 2 , Oct 7, 2001
      You could try pushing a small bit of rolled up s/s wool, up into the
      condensor, about where the cooling jacket is. This will help transfer the
      cold to the air gap in your tube.
      Pete

      -----Original Message-----
      From: paulhend@... [mailto:paulhend@...]
      Sent: Saturday, 6 October 2001 12:34
      To: Distillers@yahoogroups.com
      Subject: [Distillers] tonys coffee pot still


      I made your little still tony but got vapour and liquid out of the end
      Seems my water jacket is too short . Do you think your cooling water
      must be colder over there ?
      Should I increase the angulation of the take off pipe?





      Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
    Your message has been successfully submitted and would be delivered to recipients shortly.