Loading ...
Sorry, an error occurred while loading the content.

RE: [Distillers] Re: Pressure Cooker mods

Expand Messages
  • Brendan Keith
    If this were a stovetop still, it would help to smooth out heat transfer, so you don t get a hot spot from the element that would burn your mash/wash/wort. A
    Message 1 of 8 , Jul 21, 2005
    • 0 Attachment
      If this were a stovetop still, it would help to smooth out heat transfer, so
      you don't get a hot spot from the element that would burn your
      mash/wash/wort.

      A plate between the element and the pot would be easier.

      Pointless mod if it's propane or internal element fired.

      --
      Brendan Keith
      bkeith@...



      > -----Original Message-----
      > From: Distillers@yahoogroups.com [mailto:Distillers@yahoogroups.com]On
      > Behalf Of donald holcombe
      > Sent: Thursday, July 21, 2005 12:05 PM
      > To: Distillers@yahoogroups.com
      > Subject: Re: [Distillers] Re: Pressure Cooker mods
      >
      >
      > Thats the thing I removed then dilled and tapped for a pipe
      > plug. I did leave the rubber blow out plug just in case of a
      > preesure build up. I pulled the metal popup out of the plug
      > and put my thermometer in the hole . Ive been told I should
      > put a copper plate in the bottom of my cooker . ANYbody got
      > any ideas on this ?
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.