mel--i ran some figures on your questions 2.50mm expanding cone to 200mm
no worries just don't pack the stainless too tight and you will need a minimum of 1200 watts 1. yes 3. why not use the pipe and the cylinder as interchangeable towers??? maybe i should see the shrink!!!! 4. yes 5. no
jay--go to www.geocities.com/kiwi_distiller/ scroll to bottom of home page and halleleuja! your life will be complete THEN try www.webconx.com/ethanol.htm
THEN look in the archives this site for even more gems you subject
dee--how big is your keg?????? the smaller the keg the lower the alc./vol. or the angels share is too great ==not good!!
mike--tnx for reply most welcome as always i pass your postings onto our chemical engineer and he is astounded at the academic depths to which you travel
his comments are usually in the frame of what a boon to a site like this for newcomers ,although he did say on one issue mike and everybody in the world should be careful they are not the blindfolded sage who was asked to feel the elephants tail and called the elephant a snake ,not knowing of course what was connected,being stupid i didn't quite comprende but i think he was hinting distilling is more than chemical engineering===yes you can become an honoury tasmanian,i'm not even excepted[accepted]???? yet,some english really confuses me....aluminium; yes i was mumbling about it's ability and/or lack of it to dissapate heat where and when required it's a monster--to the pot distiller
many regards to all brian