Re: [DVRPTR_V1] Re: Connection to Reflectors
- The number 1 cause is the dplus callsign, either not registered, and/or not entered correctly.
(Including any terminal digits).
Also could be user callsign, dplus database not up to date.
The gateway log file should be logging the dplus connection status and most likely it will be
showing with an RO meaning Read Only, as in listen only, not authorized to TX.
It is also possible your software and or radio is not setup correctly.
I can't run control center and I highly recommend you switch to G4KLX software which works in all modes.
-Jim- N1JMM, KB1YPL_B
Visit my Pi running ircddb, dvrptr, Apache & many other things:
On 5/25/13 6:11 PM, klattcw wrote:
> Thanks for the reply Jim, We have got it working and it has worked great for about 24 hours and then it seems to drop out when anyone cqcqcq's. If we just connect and listen it works great but once we cqcqcq it disconnects. Any ideas?
> Thanks, VA6CWK
> --- In DVRPTR_V1@yahoogroups.com, Jim Thisdale <n1jmm1@...> wrote:
>> if you want to connect to anything dplus wise you must have a registered/valid ustrust call in the
>> the dplus call is not needed for dextra/xrf, dcs, ccs usage.
>> if the 'desired destination' is NOT in your appropriate hosts file you will need to be connected to
>> the ircddb-server.
>> -Jim- N1JMM, KB1YPL_B
>> Visit my Pi running ircddb, dvrptr, Apache & many other things:
>> On 5/23/13 10:10 PM, klattcw wrote:
>>> Hi guys, Just wondering if you guys can help us with connecting to reflectors with DVrptr control center? We are able to use the repeater just fine but are unable to connect to any reflectors or other repeaters. We are logged in to ircddb and sending aprs stats but unable to connect. do we need to have a dplus callsign in or the hamqth info in?