Loading ...
Sorry, an error occurred while loading the content.

Re: DVTool and D-rats

Expand Messages
  • PY4ZBZ
    D-RATS and Dv-Dongle: http://www.qsl.net/py4zbz/DStar/DStar.htm 73 de Roland.
    Message 1 of 9 , Oct 10, 2009
    • 0 Attachment
      D-RATS and Dv-Dongle:

      http://www.qsl.net/py4zbz/DStar/DStar.htm

      73 de Roland.



      --- In DVDongle@yahoogroups.com, Ron Wenig <rwenig@...> wrote:
      >
      > Thanks Jeff,
      >
      > I'll ask over there.
      >
      > 73, Ron ny3j
      >
      > ** N8NOE ** wrote:
      > >
      > >
      > > Ron,
      > > You are correct in the idea it's Broken packets. This is in D-Rats and
      > > NOT the dongle Software..
      > > Jeff-N8NOE
      > > (( You will get the same via RF also on a weak signal ))
      > >
      > > Jeff-N8NOE
      > >
      > > --- In DVDongle@yahoogroups.com <mailto:DVDongle%40yahoogroups.com>,
      > > Ron Wenig <rwenig@> wrote:
      > > >
      > > > I was on the REF0015C reflector today testing the DV-Dongle. Two other
      > > > stations were on and I received a couple of messages from them ok. Then
      > > > I received, what I call "broken packets". The messages that I received
      > > > were in yellow with a CQCQCQ address, a [SOB] in the beginning of the
      > > > packet and a [EOB] at the end. The text was unreadable. I have seen
      > > > this on DV-Dongle to the radio and I have asked about this in the group
      > > > but I guess no one else has seen this. I thought that I would ask once
      > > > more since I saw it on the reflector which means it must not be a
      > > timing
      > > > issue between the dongle and rf.
      > > >
      > > > 73, Ron ny3j
      > > >
      > > > aa4rc wrote:
      > > > >
      > > > >
      > > > > Hi folks.
      > > > >
      > > > > With the addition of d-rats support to dvtool, there has been a
      > > lot of
      > > > > excitement and a lot of testing. Please remember that reflector 015
      > > > > module C has been designated as the d-rats reflector/module.
      > > Please do
      > > > > not connect to other reflectors and run d-rats as there are folks
      > > > > there not running d-rats and this causes quite a bit of frustration.
      > > > >
      > > > > Also, if you wish to have d-rats conversations with RF users, please
      > > > > make sure that the gateway being used is connected to reflector 015
      > > > > module C so you don't impact other reflectors.
      > > > >
      > > > > Thanks and 73s,
      > > > > Robin
      > > > > AA4RC
      > > > >
      > > > >
      > > >
      > >
      > >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.