Loading ...
Sorry, an error occurred while loading the content.

Protect-A-Cup.

Expand Messages
  • LouRugani
    Ray, Protect-A-Cup is a Chrysler (MoPar) product, part number 4883068. Install 4 drops of the Protect - A - Cup lubricant into each rear wheel cylinder.
    Message 1 of 1 , Sep 19, 2010
    • 0 Attachment
      Ray, Protect-A-Cup is a Chrysler (MoPar) product, part number 4883068.

      Install 4 drops of the "Protect - A - Cup" lubricant into each rear wheel cylinder.

      After raising car and removing rear wheels, remove rear brake drums,
      peel back the top edge of the wheel cylinder boot and put four drops of the "Protect - A - Cup" fluid into the wheel cylinder. This fluid acts as a lubricant between the wheel cylinder, the piston and the wheel cylinder boot. Reinstall the wheel cylinder boot onto the wheel cylinder casting. Make sure that the boot seats properly on the casting lip all the way around the wheel cylinder.
      Repeat the process for the other boots.
    Your message has been successfully submitted and would be delivered to recipients shortly.