Loading ...
Sorry, an error occurred while loading the content.
 

Re: Tech help please

Expand Messages
  • David Coudriet
    Yes, it is kind of odd, because you d think that if the gasket was installed, then the joint was welded together, the gasket would catch fire or roast... Dave.
    Message 1 of 3 , Aug 17, 2006
      Yes, it is kind of odd, because you'd think that if the gasket was
      installed, then the joint was welded together, the gasket would
      catch fire or roast...

      Dave.
      --- In Crosley@yahoogroups.com, "mrcooby" <x779@...> wrote:
      >
      > --- In
      > Crosley@yahoogroups.com,
      > "David Coudriet"
      > <Crosleydc@> wrote:
      > >
      > > Anybody have tips on
      > the best way to re-
      > attach the fenders to
      > the toe
      > > board/floor due to
      > rust out? It looks like
      > some kind of gasket is
      > in
      > > there, so how would
      > they have welded it
      > together?
      > >
      > > Dave
      > >
      > ========================
      > Dave, mine were never
      > rusted but they were
      > separated at the seams,
      > so I'd wondered about
      > that, too. It's a
      > strange piece of
      > engineering - if you
      > weld/braze it, it won't
      > fit right and you could
      > warp the lower front
      > fender.
      >
      > What I did - and I'm
      > sure there are better
      > ways, but this worked
      > for me - was to close
      > apply black silicone
      > caulking from the top
      > (after first taping it
      > from beneath to prevent
      > dripping) and then
      > finger-smoothing the
      > bead. The rubber mat
      > will then cover that
      > seam.
      >
      > =Lou Rugani=
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.