Loading ...
Sorry, an error occurred while loading the content.

Re: Tech help please

Expand Messages
  • David Coudriet
    Yes, it is kind of odd, because you d think that if the gasket was installed, then the joint was welded together, the gasket would catch fire or roast... Dave.
    Message 1 of 3 , Aug 17, 2006
    View Source
    • 0 Attachment
      Yes, it is kind of odd, because you'd think that if the gasket was
      installed, then the joint was welded together, the gasket would
      catch fire or roast...

      Dave.
      --- In Crosley@yahoogroups.com, "mrcooby" <x779@...> wrote:
      >
      > --- In
      > Crosley@yahoogroups.com,
      > "David Coudriet"
      > <Crosleydc@> wrote:
      > >
      > > Anybody have tips on
      > the best way to re-
      > attach the fenders to
      > the toe
      > > board/floor due to
      > rust out? It looks like
      > some kind of gasket is
      > in
      > > there, so how would
      > they have welded it
      > together?
      > >
      > > Dave
      > >
      > ========================
      > Dave, mine were never
      > rusted but they were
      > separated at the seams,
      > so I'd wondered about
      > that, too. It's a
      > strange piece of
      > engineering - if you
      > weld/braze it, it won't
      > fit right and you could
      > warp the lower front
      > fender.
      >
      > What I did - and I'm
      > sure there are better
      > ways, but this worked
      > for me - was to close
      > apply black silicone
      > caulking from the top
      > (after first taping it
      > from beneath to prevent
      > dripping) and then
      > finger-smoothing the
      > bead. The rubber mat
      > will then cover that
      > seam.
      >
      > =Lou Rugani=
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.