Loading ...
Sorry, an error occurred while loading the content.
 

Re: head decking

Expand Messages
  • david brode
    Michael, I d think .080+ would not be a problem. Note that you ll remove more combustion space by cutting the block [larger surface area than the chamber]. You
    Message 1 of 2 , Nov 13 8:37 PM
      Michael,
      I'd think .080+ would not be a problem. Note that you'll remove more
      combustion space by cutting the block [larger surface area than the
      chamber]. You should cut the deck to set the quench at .040" or so
      first. Cut the heads if you need to remove more.
      Dave




      Brehmer" <m_brehmer_2000@y...> wrote:
      > does anybody know how much deck can be safely removed from the head
      > surface on the 72 472 heads so that compression can be increased,
      > hopefully from the 8.5 stock ratio up to around 9 to 9.25 range?
    Your message has been successfully submitted and would be delivered to recipients shortly.