Loading ...
Sorry, an error occurred while loading the content.

Re: Cad 472/500 into 1965 Chevy Pickup Has anyone done this

Expand Messages
  • kitdotjul
    ... Cadillac_Performance_Association@yahoogroups.com, kitdotjul ... PowerSteering ... transmission ... linkage ... may
    Message 1 of 7 , Oct 31, 2005
    • 0 Attachment
      --- In Cadillac_Performance_Association@yahoogroups.com, "zenishus"
      <rkirbyn@e...> wrote:
      >
      > --- In
      Cadillac_Performance_Association@yahoogroups.com, "kitdotjul"
      > <kitdotjul@y...> wrote:
      > >
      > > Anyone with experence? What Oil Pan, Clearance to
      PowerSteering
      > > Rack? Drive shaft to rear end pinion Angle issues? 400
      transmission
      > > fitting issues? Hood Clearance issues? Fan to Radiator issues??
      > >
      > > Thanks
      > >
      > i got one in a 64 c10.i had to dent the firewall at the clutch
      linkage
      > and trim about 3/8" from the frame where the passinger side exhaust
      > hooked to the head pipe.i used an oilpan from an elderado.i had to
      > move the trans crossmember back because the caddy trans is
      > longer.remove the heater to get it in then reinstall.a 425 oilpan
      may
      > work.
      >
    • kitdotjul
      ... issues?? ... exhaust ... to
      Message 2 of 7 , Nov 9, 2005
      • 0 Attachment
        --- In Cadillac_Performance_Association@yahoogroups.com, "kitdotjul"
        <kitdotjul@y...> wrote:
        >
        > --- In Cadillac_Performance_Association@yahoogroups.com, "zenishus"
        > <rkirbyn@e...> wrote:
        > >
        > > --- In
        > Cadillac_Performance_Association@yahoogroups.com, "kitdotjul"
        > > <kitdotjul@y...> wrote:
        > > >
        > > > Anyone with experence? What Oil Pan, Clearance to
        > PowerSteering
        > > > Rack? Drive shaft to rear end pinion Angle issues? 400
        > transmission
        > > > fitting issues? Hood Clearance issues? Fan to Radiator
        issues??
        > > >
        > > > Thanks
        > > >
        > > i got one in a 64 c10.i had to dent the firewall at the clutch
        > linkage
        > > and trim about 3/8" from the frame where the passinger side
        exhaust
        > > hooked to the head pipe.i used an oilpan from an elderado.i had
        to
        > > move the trans crossmember back because the caddy trans is
        > > longer.remove the heater to get it in then reinstall.a 425 oilpan
        > may
        > > work.
        > >
        >
      Your message has been successfully submitted and would be delivered to recipients shortly.