Loading ...
Sorry, an error occurred while loading the content.

Re: Cad 472/500 into 1965 Chevy Pickup Has anyone done this

Expand Messages
  • zenishus
    ... i got one in a 64 c10.i had to dent the firewall at the clutch linkage and trim about 3/8 from the frame where the passinger side exhaust hooked to the
    Message 1 of 7 , Oct 30, 2005
    • 0 Attachment
      --- In Cadillac_Performance_Association@yahoogroups.com, "kitdotjul"
      <kitdotjul@y...> wrote:
      >
      > Anyone with experence? What Oil Pan, Clearance to PowerSteering
      > Rack? Drive shaft to rear end pinion Angle issues? 400 transmission
      > fitting issues? Hood Clearance issues? Fan to Radiator issues??
      >
      > Thanks
      >
      i got one in a 64 c10.i had to dent the firewall at the clutch linkage
      and trim about 3/8" from the frame where the passinger side exhaust
      hooked to the head pipe.i used an oilpan from an elderado.i had to
      move the trans crossmember back because the caddy trans is
      longer.remove the heater to get it in then reinstall.a 425 oilpan may
      work.
    • kitdotjul
      ... Cadillac_Performance_Association@yahoogroups.com, kitdotjul ... PowerSteering ... transmission ... linkage ... may
      Message 2 of 7 , Oct 31, 2005
      • 0 Attachment
        --- In Cadillac_Performance_Association@yahoogroups.com, "zenishus"
        <rkirbyn@e...> wrote:
        >
        > --- In
        Cadillac_Performance_Association@yahoogroups.com, "kitdotjul"
        > <kitdotjul@y...> wrote:
        > >
        > > Anyone with experence? What Oil Pan, Clearance to
        PowerSteering
        > > Rack? Drive shaft to rear end pinion Angle issues? 400
        transmission
        > > fitting issues? Hood Clearance issues? Fan to Radiator issues??
        > >
        > > Thanks
        > >
        > i got one in a 64 c10.i had to dent the firewall at the clutch
        linkage
        > and trim about 3/8" from the frame where the passinger side exhaust
        > hooked to the head pipe.i used an oilpan from an elderado.i had to
        > move the trans crossmember back because the caddy trans is
        > longer.remove the heater to get it in then reinstall.a 425 oilpan
        may
        > work.
        >
      • kitdotjul
        ... issues?? ... exhaust ... to
        Message 3 of 7 , Nov 9, 2005
        • 0 Attachment
          --- In Cadillac_Performance_Association@yahoogroups.com, "kitdotjul"
          <kitdotjul@y...> wrote:
          >
          > --- In Cadillac_Performance_Association@yahoogroups.com, "zenishus"
          > <rkirbyn@e...> wrote:
          > >
          > > --- In
          > Cadillac_Performance_Association@yahoogroups.com, "kitdotjul"
          > > <kitdotjul@y...> wrote:
          > > >
          > > > Anyone with experence? What Oil Pan, Clearance to
          > PowerSteering
          > > > Rack? Drive shaft to rear end pinion Angle issues? 400
          > transmission
          > > > fitting issues? Hood Clearance issues? Fan to Radiator
          issues??
          > > >
          > > > Thanks
          > > >
          > > i got one in a 64 c10.i had to dent the firewall at the clutch
          > linkage
          > > and trim about 3/8" from the frame where the passinger side
          exhaust
          > > hooked to the head pipe.i used an oilpan from an elderado.i had
          to
          > > move the trans crossmember back because the caddy trans is
          > > longer.remove the heater to get it in then reinstall.a 425 oilpan
          > may
          > > work.
          > >
          >
        Your message has been successfully submitted and would be delivered to recipients shortly.